Lower Guard Integrated IEC Test Equipment IEC60745-2-5 Circular Saw
|
... BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard is to be cycled from the full closed position to the maximum open position and...
Guangzhou HongCe Equipment Co., Ltd.
|
Integrated Lower Guard Circular Saw IEC Test Equipment Mitsubishi Plc
|
... information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and...
Dongguan Kingpo Technology Limited
|
120V IEC Test Equipment
|
... BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard is to be cycled from the full closed position to the maximum open position and...
Guangzhou Shice Equipment Co., Ltd.
|
200g Striking IEC Test Equipment Pendulum Hammer Test Apparatus For Mechanical Strength
|
... hammer and Annex D; IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.1, figure 22-......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60745-2-5 Circular Saw Closure Durability And Lower Guard Recovery Time Test Equipment
|
...-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3. It is used to test the circular saw switch performance and circular saw lower guard’s...
Sinuo Testing Equipment Co. , Limited
|
Spring Impact Hammer For IEC60068-2-75 IEC Test Equipment
|
Spring Impact Hammer For IEC60068-2-75 IEC Test Equipment Standard: IEC 60068-2-75 Environmental testing –Part 2-75: Tests – Test Eh: Hammer tests. IEC 60065, IEC60335-1, IEC60598-1 and etc. Feature: The construction consists of a moving hammer head......
KingPo Technology Development Limited
|
Test Finger Probe,precision iec test equipment,jointed iec test finger probe
|
... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision....
ALLIED TESTING (HK) CO.,LTD.
|
IP1X / IP2X Iec Test Equipment , Test Sphere Diameter 50 Mm With Handle
|
Test Ball Test Sphere with Diameter 50mm and 12.5mm for IP1X and IP2X Testing Test Probe 1 (500g steel sphere) Introduction: Designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05, sphere is ......
Pego Electronics (Yi Chun) Company Limited
|
IEC 60745 2 5 Electric Testing Equipment Circular Saw Lower Guard Test
|
...Guard Test Device HDD8302 Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.102.3 and Annex BB, EN 60745-2-5 Application: This device is applicable to test the closing time and mechanical strength of lower guard for circular saws. Test sample: Circular saws Feature: The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard......
shanghai kerang technology co ltd
|
IEC 60227-1 Tinsel Cord Bending Snatch Test Equipment EV Connector Testing Equipment
|
...Test Equipment Complied Standards & Clauses IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. Equipment Overview The Tinsel Cord Bending and Snatch Test Equipment is designed and manufactured according to the standard requirement of IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. It is used to test......
Sinuo Testing Equipment Co. , Limited
|