800mm Heigaiprel Heat Exchanger Plates For Flanged Gasketed Plate Design
|
Product Description: The size of this heat exchanger can be customized to meet your specific requirements, ensuring that it fits perfectly into your system. The herringbone plate pattern is designed to maximize heat transfer, making this heat exchanger ......
Changzhou Victory Technology Co., LTD
|
NBR Evaporator Plate Heat Exchanger Stainless Steel Flange Connections
|
... Stainless Steel Gasket Plate Heat Exchanger Plate Type Free channel,mm Semi-welded 6/6.5 Materials 10 Heat transfer plates 316/316L,904L,254 C-276 Ni,Ti Field gaskets NBR,EPDM Ring gaskets NBR,EPDM,FKM Flange connections Metal lined: stainless steel......
Baode heat exchanger equipment co.,Ltd
|
Customized A182 F304 Stainless Steel Body Flange with High-Temperature Performance for Shell and Tube Heat Exchangers
|
...Flange, A182 F304 Stainless Steel Forging, For Shell And Tube Heat Exchanger Overview of A182 F304 Body/Channel Flange The A182 F304 Body/Channel Flange is a forged stainless steel component commonly used in industrial systems such as shell and tube heat exchangers, pressure vessels, and piping systems. Made from A182 F304 stainless steel, which contains 18% chromium and 8% nickel, this flange......
YUHONG HOLDING GROUP CO., LTD
|
Shell And Tube Heat Exchanger API 660 ASME U Stamp For Petrochemical Industry Application
|
...Heat Exchanger, API 660 , ASME U Stamp, Petrochemical Industry Application. API STANDARD 660 : Shell-and-Tube Heat Exchangers --standard specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing, and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical, and natural gas industries. ASME B16.5: Pipe Flanges and Flanged...
Yuhong Group Co.,Ltd
|
Petrochemical Double Tube Sheet Heat Exchanger Pharmacy Sanitary Pipe
|
...Heat Exchanger Tubing Manufacturers Description The double tube sheet heat exchanger is a relatively new structure at present. There is a tube sheet at the end of the heat exchange tube, called the outer tube sheet, which doubles as the equipment flange and is connected with the heat exchange tube and the tube box flange respectively. There is also a tube sheet near the end of the heat exchange......
Henan Gnee New Materials Co., Ltd.
|
Loose Flange Type Shell And Tube Heat Exchanger For Cooling Unit Using
|
... principle, the original heat transfer structure and strengthen the original heat transfer can be classified. According to the principle of heat transfer, heat transfer containers can be divided into two types of direct contact and indirect contact....
Wuhan Qiaoxin Refrigeration Equipment CO., LTD
|
Low Noise Cabinet Heat Exchanger 48VDC 80W/K High Reliability Embeded Mounting Method
|
48VDC 80W/K Enclosure Heat Exchanger IP55 R134A Refrigerant Embeded Mounting 1. Key Parameters Type Parameters Dimensions(Without flange) H*W*D 750*450*200mm Dimensions(With flange) H*W*D 784*484*200mm Installation environment Outdoor Mounting method Door ......
Tianjin Estel Electronic Science and Technology Co.,Ltd
|
1-100 M² Heat Transfer Area Tube Shell Heating Exchanger With Flanged Connection Type
|
...Heat Exchanger The Pharmaceutical Heat Exchanger is a highly efficient and reliable heating system designed specifically for the pharmaceutical industry. It is used to transfer heat between two fluids, typically a hot and a cold fluid, without the two fluids coming into direct contact with each other. Key Features: Pressure Range: 0-10 Bar Connection Type: Flanged......
SHANGHAI CHONGYANG WATER TREATMENT EQUIPMENT CO.,LTD
|
CE Approval High Flexibility PTFE Heat Exchanger , Immersion Coil Water Heater
|
Heat exchangers Of FEP/PFA And Coil Immersion Heat Exchangers For Chemical Solution Heat Exchangers Introduction 1. PTFE heat exchangers are using Japan Daikin Corporation and other imported raw materials. Using advanced tube manufacturing equipment and processing methods, hot-melt welding of tubes and flanges for Assembly into heat exchangers. PTFE heat exchanger......
Surplus Industrial Technology Limited
|
16mn Heat Exchanger Tube Sheet For Pressure Vessel Steam Turbine
|
...made of other materials, it will not be fused with stainless steel, and there will be small cracks in the middle If the tubesheet flange is made of other materials, it will not be fused with stainless steel, and there will be small cracks in the middle....
TORICH INTERNATIONAL LIMITED
|
Submit your “heat exchanger parts bottom flange” inquiry in a minute :