Welded Helical Spiral Serrated Finned Tube HFW Fin Tube For Heat Exchanger
|
...Finned Tube , HFW Fin Tube For Heat Exchanger Overview Welded helical spiral serrated finned tubes are a type of heat exchanger tube designed to enhance heat transfer efficiency. These tubes are commonly used in applications where efficient heat exchange is crucial, such as in boilers, air coolers, and other industrial heat exchangers......
Yuhong Group Co.,Ltd
|
ASTM A213 TP347H HFW Finned Tubes for Heat Exchangers
|
Stainless Steel HFW Finned Tubes ASTM A213 TP347H For Petroleum Refining Project Chemical Composition (%) Grade C Mn P S Si Cr Ni TP347H 0.04-0.10 2.00 0.045 0.030 1.00 17.00-19.00 9.0-13.0 Mechanical Properties Grade Tensile Strength,min Yield Strength......
YUHONG HOLDING GROUP CO., LTD
|
ASME SA213 T12 Austenitic HFW Fin Tube For Heat Exchangers
|
ASME SA213 T12 High Frequency Welding Fin Tube For Power Plants Product Specifications Attribute Value Base Tube Material T12 Standard ASME SA213, ASTM A213 Fin Material Stainless steel Fin Type High Frequency Welding Serrated Fin Tube Length Max.: 34m/pc ......
YUHONG HOLDING GROUP CO., LTD
|
DELLOK Welded Helical HFW Helical Spiral Serrated Finned Tube For Heat Exchanger
|
DELLOK High Efficiency Welded Helical HFW Helical Spiral Serrated Finned Tube For Heat Exchanger About Us DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO.,LTD.) was established in 2002, which is located in Jiangsu, China. After many years of development......
Dellok Yonghui Radiating Pipe Manufacturing Co.,Ltd.
|
Boiler Stainless Steel Shell And Fin Tubes For Heat Exchangers Energy Saving
|
...Fin Tubes For Heat Exchangers Energy Saving Product Description of Fin Tube Finned Tube Heat Exchangers consist of a shell and finned tubes assembly.Fins are used to increase the effective surface area of heat exchanger tubing.Finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside;as in heat......
Zhangjiagang HuaDong Boiler Co., Ltd.
|
OD 200MM Double H Type Steel Boiler Fin Tube For Heat Exchanger
|
...Fin Tube for Heat Exchanger ASME OD 20-200MM WT 3-50MM Top Grade Quality Product Description(Fin Tube) H-type finned tube heat exchanger elements maintain a high capacity for heat transfer, possess superior self-cleaning properties and retain the ability to effect flue gas waste heat recovery in boiler renovations. Convective heat transfer coefficient is proportional to fin pitch, but inversely proportional to fin height and fin...
ZHANGJIAGANG HUA DONG ENERGY TECHNOLOGY CO.,LTD
|
Evaporator Aluminum Fin Heat Exchanger / Finned Tube Type Heat Exchanger
|
...Aluminum Fin Heat Exchanger / Finned Tube Type Heat Exchanger Product Description 1. Material :alumin tube , aluminum fin,galvanized plate 2. Aluminum foil: hydrophilic or bare 3. Fin type: louver fin or flat fin or corrugated fin 4. Pitch of fins can be ......
Hefei TATATO Refrigeration Science & Technology Co., Ltd.
|
Hot water tanks copper finned tubes/aluminum finned tubes for heat exchanger
|
...finned tubes/aluminum finned tubes for heat exchanger Product Description: Name Hot water tanks copper finned tubes/aluminum finned tubes for heat exchanger Brand OEM Standard ASME SA213/ASTM A213, ASME SA106/ASTM A106, ASME SA179/ASTM A179, ASTM B111/ASME SB111 Base Tube Material stainless steel, carbon steel, copper alloy, alloy steel (No theoretical limit) Fin......
Changzhou Aidear Refrigeration Technology Co., Ltd.
|
Extruded Fin Tube , ASME SA249 TP304 Finned Tube For Heat Exchanger , Air Cooler
|
... tubes. TP304 refers to the grade of stainless steel used in the tubes. Finned Tubes are tubes that have fins attached to their outer surface. These fins increase the surface area of the tube, allowing for better heat transfer between the fluid inside the...
YUHONG HOLDING GROUP CO., LTD
|
Helical Finned Tube Continuously Welded Spiral Fin Tube For Heat Exchanger
|
... welded helically along the tube’s outer surface. They are typically made from carbon steel, stainless steel, or alloy steel depending on the thermal and corrosion requirements. The fins are mechanically bonded or continuously welded to the base tube to...
TORICH INTERNATIONAL LIMITED
|
Submit your “hfw finned tubes for heat exchangers” inquiry in a minute :