Hidrostal Sewage Pump Mechanical Seal HI-15.87mm KB-5/8 Impeller End Mechanical Seal
|
Preperation: 1. Shaft Outside Diameter is within tolerance +-0.05mm 2. Shaft run out <0.1mm 3. Shaf end float <0.13mm 4, No sharp edges on the shaft over the o ring Note: During the installation,don't scratch or damage the o ring.lf anything is damaged......
YUEMI
|
Unbalanced 202 208 Submersible Pump Mechanical Seal 60mm Singe Spring
|
...202 208 Submersible Pump Mechanical Seal 60mm Singe Spring Mechanical Seal Type 202 208 Submersible Pump Seal Mechanical Seal Mechanical seal type 202 208 Submersible pump sewage pump double end face seal mechanical seal specifications 10 12 14 15 16 17 18......
Guangzhou Bogeman Mechanical Seal Co., Ltd.
|
Johncrane T2100 Sewage Submersible Pump Mechanical Seal
|
...Mechanical Seals For Submersible Sewage Pumps Mechanical seals used for the John Crane pump Shaft size 16mm to 75mm Temperature -30 degree to 200 degree,dependent on the elastomer Pressure Up to 10 bar End play/axial float allowance +/-0.1mm Speed Up to 15......
Ningbo Yade Fluid Connector Co.,Ltd
|
Shaft Size 25mm Cartridge Mechanical Seal Water Pump Seal Speed Less 15 M/S
|
Mechanical Seal CR CRN Shaft Size 25mm 32mm 38mm 50mm 65mm Cartridge Seal For Water Pump Description: Operational Conditions: Temperature: -20ºC to +180ºC Pressure: ≤2.5MPa Speed: ≤15m/s Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring......
Hefei Supseals International Trade Co., Ltd.
|
Submit your “hi 15 87mm sewage pump mechanical seal” inquiry in a minute :