IEC 60335-2-80 Fig. 102 Ceiling Fan Test Pin Simulating Wear On Bolt
|
IEC 60335-2-80 Fig. 102 Ceiling Fan Test Pin Simulating Wear On The Bolt Product overview: This stainless steel test pin meets the requirements of IEC60335 -2- 80 clause 22.102.1, figure 102. It is simulated wear on the bolt of ceiling fans. Technical Characteristics: Applied Standards & Clauses IEC60335 -2- 80 clause 22.102.1, figure 102 Test Pin......
Sinuo Testing Equipment Co. , Limited
|
IEC 60335-2-80-Figure 102 Durable Steel Test pin
|
... same as the original bolt that connects the down rod to the motor b diameter 50 % “a” Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one...
KingPo Technology Development Limited
|
Scratch Resistant Pin Electrical Safety Test Probe of IEC 60335-1
|
...standard requirement of IEC60335-1 clause 21. Test method: Make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the surface of the sample at a speed of...
HK LEE HING INDUSTRY CO., LIMITED
|
rigid test probe,IEC 60335 IEC 60065,test probe.test finger probe.iec test probe
|
rigid test probe,IEC 60335 IEC 60065 Model TP11: rigid test probe,IEC 60335 IEC 60065 rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner ......
ALLIED TESTING (HK) CO.,LTD.
|
IEC 60335-1 Household Appliance Test Equipment Power Cord Flexing Test Apparatus
|
Household Appliance Test Equipment IEC 60335-1 Power Cord Flexing Test Apparatus Standard: IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements clause 23.3 and 25.14, figure 8. Application: It is used to check......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60335 Test Finger Probe
|
... Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC 60950 EN 60950 UL 60950 CSA 950. Hot Tags: iec 60335 test finger probe, China, manufacturers, suppliers, factory, custom, wholesale, IEC60065:2014 Hi-pot (Voltage Withstand)...
Dongguan Kingpo Technology Limited
|
IEC 60335 Test Finger Probe
|
Test Finger Probe , IEC 60335 Testing Probe Kit With Carrying Case Product information: 1.IEC Jointed Finger Probe 2.50mm Impact Test Ball 3.Test Pin Probe: short 4.Rigid Finger Probe 5.Ball Pressure Tester 6.Telecom Test Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test pin......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Similar Test Finger Probe B With 50mm Circular Stop Face IEC 60335-1 Clause 20.2
|
Similar Test Probe B with 50mm Circular Stop Face IEC60335-1 Clause 20.2 1. Introduction The probe is similar to test probe B of IEC61032 but having a circular stop face with a diameter of 50mm, instead of the non-circular face. The probe is designed to ......
Pego Electronics (Yi Chun) Company Limited
|
IEC61032 IEC60529 IP2X Test Probe B Test Finger
|
IEC61032 IEC60529 IP2X Test Probe B Test Finger Article NO.: BND-B Specification: The Standard Test Finger Probe / The Standard Test Knurled Finger Probe / Test Probe B / IP2X Protection Grade Probe Technical Parameters: 1, Knurled Finger Diameter:12mm 2, ......
HongKong Bonad Technology Limited
|