IEC 60112 Plastic Testing Equipment / Wire Cable Tracking Index Test Machine CTI for Insulating Materials
|
... tracking indices of solid electrical insulating materials on pieces taken from parts of electrical and electronic equipment and on plaques of material using alternating voltages.In normal use, components made of insulating material may become moist and...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
UL94 Horizontal / Vertical Flame Test Chamber , 20d / 45d Plastic Test Equipment
|
...Test Chamber Plastic Test Equipment Application: Test the flammability of the plastic material spare part in appliances. Flammability, combustion speed, flame spread, the intensity of combustion can be acquired during test automatically and precisely. Standard: Horizontal flame test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210. 50W Vertical flame test:UL94, V0,V1,V2,IEC......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
LCD display Plastic Testing Equipment , Carbon Black Content Tester
|
...Plastic Testing Equipment , Carbon Black Content Tester Uses: This machine is to determine the carbon black content of polyethylene, polypropylene, polybutylene plastic. Sample is heated up under the nitrogen atmosphere,carbon black is obtained by pyrolysis. Related standards: ISO 6964,GB/T2591.41, JTG E50 T1165,GB/T 13021, IEC......
Dongguan Liyi Environmental Technology Co., Ltd.
|
IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material
|
IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test......
Dongguan Kingpo Technology Limited
|
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector
|
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test...
Sinuo Testing Equipment Co. , Limited
|
IEC 60669-1 Test Equipment Self Ballasted Lamp Bulb Load Box Three Test Stations
|
... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IPX1~8 Waterproof Test System IEC 60529 Waterproof Testing Equipment
|
IPX1~8 Waterproof Test System IEC 60529 Waterproof Testing Equipment Complied Standards & Clauses This IPX1~8 waterproof test system conforms to IEC 60529:2013, etc. Equipment Overview This test device is to verify Protection against Vertically Falling ......
Sinuo Testing Equipment Co. , Limited
|
IEC 62133 Battery Testing Equipment Electric Vibration Testing System
|
..., fire or explosion. The electrodynamic vibration test system is a precision test equipment that simulates the actual working environment of a battery. The vibration test system consists of four parts: vibration test bench, power amplifier, controller and...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60529 IP Testing Equipment , IPX1 IPX2 Movable Rain Drip Box Ingress Protection Test Equipment
|
... is designed and manufactured according to IEC 60529 Degrees of protection provided by enclosures (IP Code), this equipment is widely used in lamps, electric and electronic products certification testing of IPX1,IPX2. This device has been widely adopted by...
KingPo Technology Development Limited
|
550*400*600mm Plastic Testing Equipment Heating Distortion Resistance Testing
|
...Plastic Testing Equipment Heating Distortion Resistance Testing Application: Apply for plastic heating deformation resistance testing, put the testing sample on two supporting point in testing machine, forcing the heating rod and rising temperature with 2℃/min. when the center of the testing sample sinking to a specific position (plastic......
Infinity Machine International Inc.
|
Submit your “iec 60587 plastic testing equipment” inquiry in a minute :