IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard
|
IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard Standard of IEC Testing Equipment: IEC 60745-2-5 Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular saws Annex BB.20.102, Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301 Application of IEC Testing Equipment: It is used to test......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60745 Electric Hammer Durability Impact Test Equipment For Hand Held Motor
|
IEC 60745 Electric Hammer Durability Impact Test Equipment For Hand Held Motor Product Information: This electrical hammer durability impact test equipment conforms to IEC 60745-2-1 clause 17 and IEC 60745-2-6 clause 17 and figure 103. This apparatus is applicable to durability test for hand held motor operated electric tools such as electric hammers, Electric drills and impact......
Sinuo Testing Equipment Co. , Limited
|
Fire Resistance Test Furnace IEC 60331 , Impact Test Equipment For Wire / Cable
|
IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Battery Impact Testing Equipment UN 38.3.4.6 and IEC 62133 of the battery testing equipment
|
... (or battery pack) on the battery subjected to free weight impact from different heights from different heights, resulting in internal short circuit of the battery. Specification Drop hammer mass 9.1kg Impact height 0~1000mm adjustable(usually 610mm)...
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
IEC62262 IK Mechanical Impact Test Equipment With 2-20J Pendulum Impact Hammers
|
...Impact Test Equipment with 2J to 20J Stainless Steel Pendulum Impact Hammers 1. Introduction IK pendulum hammer is designed according to IEC60068-2-75 and IEC62262 (equivalent EN62262) , and can meet the test requirements of IEC60598, EN50102. The IK Code was originally defined in European Standard BS EN 50102:1995 and amended in 1998, following its adoption as an international standard (IEC......
Pego Electronics (Yi Chun) Company Limited
|
Electric vehicle charging station Mechanical Strength & Impact Test Equipment
|
...11 standards. Equipment Overview 1. Main purpose: This device is composed of two kinds of impact test apparatuses, and two kinds of mechanical strength test methods can be used to perform impact test on EVSE shell. 2. Installation sample: installation of a...
Sinuo Testing Equipment Co. , Limited
|
Ball Drop Impact Test IEC 60950-1 Impact Test Using A Steel Ball Testing Machine
|
Ball Drop Impact Test IEC 60950-1 Impact Test Using A Steel Ball Testing Machine Over 20years factory in China Fast delivery 1 year warranty Professional technical support Drop Ball Impact Tester used to measure the impact resistance by the specified steel......
ASLi (CHINA) TEST EQUIPMENT CO., LTD
|
300kg Capacity Package Slope / Incline Impact Testing Equipment With ISTA, IEC Standard
|
...Impact Testing Equipment With ISTA, IEC Standard I. Product Application Incline shock tester is mainly used to simulate the impact and damage resistance of product packaging in a real environment, such as handling, loading and unloading, impact during shifting from one cabin to another and impact......
Labtone Test Equipment Co., Ltd
|
IEC 60745 2 5 Electric Testing Equipment Circular Saw Lower Guard Test
|
Circular Saw Lower Guard Test Device HDD8302 Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.102.3 and Annex BB, EN 60745-2-5 Application: This device is applicable to test the closing time and mechanical strength of lower ......
shanghai kerang technology co ltd
|
Integrated Lower Guard Circular Saw IEC Test Equipment Mitsubishi Plc
|
... Saw Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and...
Dongguan Kingpo Technology Limited
|
Submit your “iec 60745 2 impact test equipment” inquiry in a minute :