Single Station Figure 27 IEC 60884-1 Impact Test Apparatus
|
...Apparatus For Impact Test At Low Temperature Mechanical Release Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.4, clause 30.4, figure 27 and figure 42. Standard description: Clause 24.4: The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus......
Guangzhou HongCe Equipment Co., Ltd.
|
1 Or 3 Stations Switch Life Tester IEC 60884-1 Figure 27 And 42 Power Cables Low Temperature Impact Test Apparatus
|
IEC 60884-1 Figure 27 and 42 Low Temperature Impact Test Apparatus Product information: The low temperature impact test apparatus meets the requirements of IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on. This device is used to check the impact......
Sinuo Testing Equipment Co. , Limited
|
IEC60884 Fig27 Fig 42 Impact Test Apparatus On Pins Provided With Insulating Sleeves
|
...apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature of (–15 ± 2) °C, for at least 16 hours. At the end of this ......
Guangzhou Shice Equipment Co., Ltd.
|
IEC60811-1-4 100mm Height Low Temperature Impact Test Apparatus
|
...30.4 IEC60811-1-4 ‘Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature’ Application: This device is use for checking the impact resistance at...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60884-1 Figure 40 Apparatus for Testing Resistance to Abnormal Heat of Insulating Sleeves of Plug Pins
|
IEC 60884-1 Figure 40 Apparatus for Testing Resistance to Abnormal Heat of Insulating Sleeves of Plug Pins 1. Introduction Apparatus for testing resistance to abnormal heat of insulating sleeves is designed according to IEC6884-1 figure 40 and clause 28.1.2, the test apparatus consists of an insulating plate A and of a metal part B to verify the insulating sleeves of plug pin resistance to abnormal heating. The specimens are inserted in the test...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60811-504 2012 Mandrel Test Apparatus & Impact Test Apparatus
|
... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Apparatus For Testing Resistance To Abnormal Heat Of Insulating Sleeves Of Plug Pins , IEC 60884-1 Test Equipment
|
... sleeves of plug pins , IEC 60884-1 test equipment 1. Product information: To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40,This test apparatus consists of an insulating plate A...
KingPo Technology Development Limited
|
Automatic IEC 60884-1:2022 Clause 8.8 Figure 5 Apparatus For Durability Of Marking
|
... value: 5±1N Test time: 0-9999S Standard: Durability Marking shall be easily legible, durable and indelible. Laser marking directly on the product and marking made by moulding, pressing or engraving are not subjected to this test. Compliance is checked by...
Dongguan Kingpo Technology Limited
|
IEC 60884-1 Figure 13 Device for Checking the Resistance to Lateral Strain
|
IEC 60884-1 Figure 13 Device for Checking the Resistance to Lateral Strain Lateral Strain Test Apparatus Product details: The appliance conforms to the standard of IEC60884-1 clause 13.14 figure 13. It is suitable for checking socket which rated current......
HK LEE HING INDUSTRY CO., LIMITED
|
IK Code Test Machine Impact Resistance Test Apparatus High Energy Impact Test System
|
...Test Machine Impact Resistance Test Apparatus High-energy Impact Test System Complied Standards & Clauses This apparatus is manufactured in full accordance with the following international standards: IEC 60068-2-75:2014 – Environmental testing, Part 2-75: Test Eh: Hammer tests IEC 62262:2002 – Degrees of protection by enclosures against external mechanical impacts (IK Code) IEC......
Sinuo Testing Equipment Co. , Limited
|
Submit your “iec 60884 1 impact test apparatus” inquiry in a minute :