IEC 60884 100mm Torque Disc Flexing Cable Torque Tester
|
...Part 1: General requirements’ clause 23.2 Application: This device is used for testing the wear resistance ability of flexing cable with protective sheath of plug, portable socket-outlet, fixed accessories with conductor and connectors, not including the...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60884-1 Stainless Steel Tensile Strength Testing Machine with Soft Cable Torque Tester
|
... torque test to flexing cable of rewirable plugs and rewirable portable socket-outlets where they are connected to the terminals and that their covering is protected from abrasion. Test sample with Tensile Strength ......
Guangzhou HongCe Equipment Co., Ltd.
|
45° Switch Life Tester IEC 60884-1 Figure 21 Plug Socket - Outlet Flexible Cable 90° Flexing Test Apparatus
|
...figure 21 clause 23.4, which is used to process the flexing test for the flexible cable of non-rewirable plugs and non-rewirable portable socket-outlets. Equipment characteristics: The test times (up to 999999) can be preset on this test ......
Sinuo Testing Equipment Co. , Limited
|
Cable / Cord Anchorage Torque Tester IEC 60335-1 Clause 25.15 / IEC60950-1-class3.2.6
|
Cord Anchorage Torque Tester / Power Cord Tension and Torque Tester Description: This device is design and manufactured accord to the requirements of IEC 60335-1 clause 25.15, GB2486 and relevant standards. It is use to perform tension and torque test on ......
KingPo Technology Development Limited
|
Torque Balance Plug Socket Tester SOB-1 IEC 60884 0-200mm Force Arm
|
Socket-outlet Torque Balance SOB-1 Product information: The HT plug torque tester conforms to the standard of IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug pin normally ......
shanghai kerang technology co ltd
|
IEC 62196-1 Clause 25.3 Cord Anchorage Pull Force And Torque Tester For EV Plugs And Vehicle Connectors
|
... and torque tester is designed according to IEC62196-1 clause 25.3 figure 17 and IEC60309-1 clause 23.3, It is used to test tension and torque on the electric vehicle plug and vehicle connectors provided with a flexible cable, it shall not be possible to...
Pego Electronics (Yi Chun) Company Limited
|
EV Charging Cable Pull Force Torque Tester PLC Touch Screen Control
|
Electric Vehicle Charging Station Cable Anchorage Pull Force and Torque Test Apparatus Complied Standards & Clauses It is designed and manufactured according to IEC 61851-1:2017 clause 11.6. Product Overview Samples and restrictions: Electric vehicle ......
Sinuo Testing Equipment Co. , Limited
|
6 Work Station Flexing Test
|
...Cable Flexing Swivel Testing Machine With 6 Workstations Product Introduction: Plug Cord Flexibility Tester is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21, which can process 10,000 flexing at a rate of 60 flexing per minute. The test equipment has 6 workstations, thus six cables......
Guangzhou Shice Equipment Co., Ltd.
|
Power Cord Static Flexing Tester As Per IEC 60227 And IEC 60245-2
|
Product description: Power cord static flexing tester is applicable to standard IEC60227
Advanced Instruments Co.,Limited
|
IEC-60794-1-2 Standard Fiber Optic Cable Repeated Bending Test Equipment
|
... Test Equipment: Optical Fiber Cable Repeated Bending Tester is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing). Optical Fiber Cable Impact Tester Series allows a cable sample to be bent backwards and...
Dongguan Wirecan Technology Co.,Ltd.
|