Home > Machinery > Apparel & Textile Machinery > Textile Machinery >

Iec60335 2 14 Ci 20 102 Blender Test Probe

1-10 Results for

iec60335 2 14 ci 20 102 blender test probe

from 7 Products

IEC Safety Blender Test Finger Probe IEC60335-2-14 CI.20.102

... from above and flat surface can be touched when the blade is rotating. The test is achieved by applying a cylindrical rod from any position where the angle between the probe and the blade above is 45°to touch the blade. During the test, it shall not be...

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

8mm Cylindrical Rod Test Probe For Blender As Per IEC 60335-2-14 Clause 20.102

... 20.102 and GB4706 clause 20.102, it is applied to check if the blades of hand-held blenders are completely screened from above and unable to touch a flat surface while rotating. The cylindrical rod from any position between the vertical and an angle of...

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

Stainless Steel Blender Test Probe HT-I24

Blender Probe HT-I24 Standard:IEC60335-2-14 CI.20.102. Application:It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat surface can be touched when the blade is rotating. Test sample:Handheld blender. Feature:The test is achieved by applying a cylindrical rod from any position where the angle between the probe and the blade above is 45°to touch the blade. During the test......

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Φ8㎜ IEC Safety Blender Test Finger Probe Blade Of Hand-Held Stirrer

... Product information: The blender probe complies with IEC60335-2-14 CI.20.102. It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat surface can be touched when the blade is rotating. The test is achieved by...

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

φ40 Mm Cylinder Rod Test Probe With Hemispherical End IEC60335-2-14

IEC60335-2-14 Hand-held blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103. It is used to verify the hand-held blenders other than hand-held food mixers provided with a blender......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

8,0 mm Test Rod of IEC60335-2-14

IEC60335-2-14 8mm Test Rod Technical parameters: Diameter of the probe: 8 mm Probe materials: Stainless steel Handle: Nylon 20.102 Blades of hand-held blenders shall be completely screened from above and shall not be able to touch a flat surface while ......

HK LEE HING INDUSTRY CO., LIMITED

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

IEC60335-2-14 Household Appliance Test Equipment Probe With 125mm Diameter Stop Face

Household Appliance Test Equipment Test Probe With 125mm Diameter Stop Face Standard: IEC 60335-2-14 Household and similar electrical appliances – Safety – Part 2-14: Particular requirements for kitchen machines clause 20.2; IEC 61032 Protection of persons......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

Submit your “iec60335 2 14 ci 20 102 blender test probe” inquiry in a minute :

*From:	Your email address is incorrect!
To:	HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD Products: IEC60335-2-14 Household Appliance Test Equipment Probe With 125mm Diameter Stop Face
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec60335 2 14 ci 20 102 blender test probe” inquiry

*From:
Your email address is incorrect!
To: Guangzhou HongCe Equipment Co., Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories