IEC60695-2-10 Flammability Testing Equipment PLC Control
|
IEC60695-2-10 Flammability Testing Equipment - Glow Wire Tester PLC Control Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60695-2-10 Flammability Testing Equipment
|
...Flammability Testing Equipment For IEC60695-2-10 With 4mm Glow-Wire And Button Operation Standard: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure, IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products, IEC60695-2-12 Fire hazard testing......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Glow Wire Tester, IEC60695-2-10 Flammability Testing Equipment ,Glow-wire apparatus
|
...IEC60695-2-10 Flammability Testing Equipment ,Glow-wire apparatus Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test......
KingPo Technology Development Limited
|
IEC60695-2-10 Flammability Testing Glow Wire Test Apparatus
|
...-2-13, GB/T 5169.13, IEC62368-1 Section 6.3.1, IEC60598-1 Section 13.3.2, IEC60335-1 Section 30.1. It is widely used in material testing on lamps, household appliances, IT/AV equipment,...
Pego Electronics (Yi Chun) Company Limited
|
UL94 Flammability Test Equipment With 50W 500W Double Power Switching
|
...-vertical flame test apparatus are designed and manufactured according to the standard and related requirement of UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC60695-11-20. It simulates the influence of early-stage flame when...
Dongguan Kingpo Technology Limited
|
IEC60695-2-10 Programmable Glow Wire Flammability Test Equipment
|
...IEC60695-2-13, it is required by IEC 60335 clause 30, IEC 60598, UL746A, etc. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in s short time. It is suitable for...
Sinuo Testing Equipment Co. , Limited
|
UL94 Flammability Testing Equipment , Horizontal Vertical Flammability Tester
|
...Test Apparatus Standard:UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC60695-11-20. Application:It simulates the influence of early-stage flame when there is a fire around the electric and electronic products, so that to judge the igniting danger degree. It is mainly used in plastic and other non-metallic material sample, solid material. It is also applicable in the Horizontal, vertical flammability...
shanghai kerang technology co ltd
|
Touch Screen Flammability Testing Equipment / Needle Flame Tester IEC60695-11-5 IEC60695-2-2
|
... the current advanced embedded computer control, to achieve full intelligent control. The needle flame test is to use a needle burner of the specified size (Φ0.9mm), with a specific gas (butane or propane), and the sample is fired at a 45° angle. The...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Professional Glow Wire Tester Flammability Test Equipment , Laboratory Testing Machine
|
...wire test apparatus and general test program and GB5169.10, UL 746 a, IEC829 VDE0471 standards such as use of no flame light-off source program simulation test project. Glow wire tester would stipulate Ni80 / Cr20) material and shape of the heating wire in...
Dongguan Hust Tony Instruments Co.,Ltd.
|
IEC60695 Flammability Test Equipment 0.5M3 Glow Wire Test Apparatus
|
IEC60695 Flammability Test Equipment 0.5M3 Glow Wire Test Apparatus Glow wire test is IEC6 0695-2-10: 2000 ~ IEC6 0695-2-13: 2000 Glow Wire / Hot Wire, Basic Test Method, Glow-wire Test Device and General Test Procedure and UL 746A, IEC829 DIN695, VDE0471 The use of non-flame ignition source program simulation test......
Guangzhou Kinte Electric Industrial Co.,Ltd
|
Submit your “iec60695 2 10 flammability testing equipment” inquiry in a minute :