IEC60884-1 Figure 12 Test Apparatus for Deflection on Screwless Terminals
|
IEC60884-1 Figure 12 Test Apparatus for Deflection on Screwless Terminals 1. Introduction The test apparatus for deflection on screwless terminals is to meet the test requirements of IEC60884-1 clause 12.3.12 and figure 12 for conducting deflection test to conductor connect with screwless terminals and testing the voltage drops. The test apparatus consists by deflecting device and voltage drop meter. 2. Specification Test......
Pego Electronics (Yi Chun) Company Limited
|
IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine
|
IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine Product details: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10 figure......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60884 Power Cord Flexing Test Apparatus
|
IEC 60884 Figure 21 Plug Socket Test Equipment Power Cord Flexing Tester Standard: IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 23.4 and figure 21 Application: This device is used......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 61386-1 Clause 12 Figure 8 Test Apparatus For Resistance To Heat For Corrugated Pipes
|
IEC 61386-1 Clause 12 Figure 8 Test Apparatus For Resistance To Heat For Corrugated Pipes Product information: It is suitable for heat resistance testing of various semi-rigid casings and corrugated pipes to determine the required heat resistance value of ......
Sinuo Testing Equipment Co. , Limited
|
IEC60884 Figure 20 Apparatus For Testing Cord Retention / Cable Retention Test Apparatus
|
IEC60884 figure 20 Apparatus For Testing Cord Retention / Cable Retention Test Apparatus Product details: The cable retention test apparatus is designed and manufactured according to the standard requirement of IEC60884 figure 20. It is aim at test cord ......
KingPo Technology Development Limited
|
Checking Conductors Damage IEC60884 Fig11 Test Apparatus
|
...standards such as IEC60884-1 clause 12.3.10 figure 11, IEC60669 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides...
Guangzhou Shice Equipment Co., Ltd.
|
Electric Vehicle Multiple Portable Socket Outlets Mechanical Strength Test Apparatus
|
...Test Apparatus Complied Standards & Clauses IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.3, fig 19. IEC60884-1:2006 "Plugs and socket-outlets for household and similar purposes- Part1:General requirements" clause 24.9 and figure......
Sinuo Testing Equipment Co. , Limited
|
AC220V 50Hz IEC Test Equipment For Checking Wire Conductors Damage
|
... test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10 figure 11, IEC60669 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal is...
Dongguan Kingpo Technology Limited
|
IEC 60695 Glow Wire Test Apparatus Test Fire Hazard Of Electronic Products
|
IEC 60695 Glow Wire Test Machine Test Fire Hazard of Electronic Products 1. Test Standard IEC60695-2-10/11/12/13
DONGGUAN LONROY EQUIPMENT CO LTD
|
Low Temperature Impact Test Device LTI-1 IEC60884 Use With Cryostat
|
...fit for impact test of wire while the latter one is applied for the impact test of plug, socket, switch, wire and electrical conduit. Technical parameters: This device is used with the cryostat. It should be put in the sponge-rubber pad of 40mm-......
shanghai kerang technology co ltd
|