IEC60990 Figure 5 Facile Touch Current Measurement Network
|
IEC60990 Figure 5 Facile Touch Current Measurement Network Applicability: National entry-exit inspection and quarantine systems for electrical product inspection. State quality and technical supervision electrical product quality inspection departments. ......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60598 G.2 Touch Current Measuring Network
|
... network, touch current weighted for let-go (for portable class I luminaires). IEC60990 Figure 3 Measuring network, unweighted touch current. IEC60990 Figure 4 Measuring network, touch current weighted for perception or startle-reaction. IEC60990 Figure 5...
Guangzhou Shice Equipment Co., Ltd.
|
IEC 62368-1 Test Equipment Clause 5.2.2.2 Touch Current Measuring Circuit
|
... method of protective conductor current, (Figure 4-mesuring network touch current weighted (sensory current or reaction current), it is required by IEC 62368-1:2018 clause 5.2.2.2, IEC 60335-1 clause 13.2, IEC60065:2014 cl.9.1.1.2 b) and Fig.D.1 of...
Sinuo Testing Equipment Co. , Limited
|
IEC61010-1 Clause 6.3.1 Figure A.3 Electrical Safety Testing Current Measuring Circuit for Electrical Burns at High Frequencies
|
...Current Measuring Circuit for Electrical Burns at High Frequencies 1. Introduction The Measuring Circuits for Touch Current for Electrical Burns at High Frequencies is designed and manufactured according to the requirements of IEC60990 figure 3 and IEC61010-1 clause 6.3.1 and Figure A.3. 2. Standard IEC60990 Methods of measurement of touch current and protective conductor current......
Pego Electronics (Yi Chun) Company Limited
|
Prospective Voltage Touch Protective Conductor Current IEC60990-Figure 3, 4, 5
|
IEC60990-Figure 3, 4, 5 Measurements of Prospective Touch Voltage Touch Current and Protective Conductor Current Standard: IEC60990-Figure 3, 4, 5...
KingPo Technology Development Limited
|
Electronic Engineering Lab Equipment AC Circuit Network Educational Trainer 2CBM 198kgs
|
...Network Electronic Engineering Lab Equipment For Educational Trainer 1. The trainer should have following facilities: Study the characteristics of pure resistive circuit, inductive circuit, pure capacitive circuit. Study the characteristics of pure resistive parallel circuit, inductive parallel circuit, pure capacitive parallel circuit. Measuring current......
Jinan Should Shine Didactic Equipment Co., Ltd.
|
