IEC62196-1 Electric Vehicle Connector Pull Force And Torque Test Equipment
|
..., connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and table 11, IEC60309-1: 2012 clause 23.3, etc. Equipment Principle and Structure: Pull is realized by...
Sinuo Testing Equipment Co. , Limited
|
IEC62196-1 Electric Vehicle Plugs And Connectors Cable Pull And Torque Test Apparatus
|
... clause 23.3, etc. Equipment Overview This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. Pull is realized by single-phase speed-regulating motor to...
Sinuo Testing Equipment Co. , Limited
|
EV Connectors Testing Equipment IEC 62196 Test Finger Probe B with 42V Electric Indicator
|
...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to...
Pego Electronics (Yi Chun) Company Limited
|
IEC62196-1 Electric Vehicle Test Equipment For Charging Plug And Socket Cable Flexing
|
IEC 62196-1 Electric Vehicle Charging Plug And Socket Cable Flexing Test Equipment Standard For Electric Vehicle Charging Plug And Socket Cable Flexing Test Equipment: IEC 62196-1:2014 "Plug,socket-outlets,vehicle couplers and vehicle inlets–......
KingPo Technology Development Limited
|
IEC 62196-1 Connection Set Conductive Charging For Electric Vehicles Test Machine
|
...Electric Vehicles Test Machine Introduction: IEC 61851-1 specifies electric vehicle conductive charging equipment. This international standard, referred to as the IEC 60309 series in IEC 61851-1, specifies the requirements for plugs, socket-outlets, connectors, inlets and cable assemblies as described in IEC 61851-1. Some charging can be achieved by direct connection from an electric vehicle...
Guangzhou HongCe Equipment Co., Ltd.
|
Durable Electrical Cable Assemblies Receptacle Red Vehicle Wiring Harness
|
#6/#8/#10 Stud Terminal & 187 Receptacle Red Custom Wiring Harness 18AWG Wire Specification: Products Name Wiring Harness Application Equipment/Machine Internal Connector 1 Spade Terminal Connector 2 Female 187 Receptacle Cable UL 1007 18AWG Cable ......
ShenZhen JWY Electronic Co.,Ltd
|
Top Current Simulation Evse Tester With IP54 GFCI And CP Pre Testing AC Charging Station
|
...testing AC charging station Features of Top Current Simulation Evse Tester with IP54,GFCI and CP pre testing AC charging station The adapter is capable of conducting electrical safety and functiontests on mode 3 electric vehicle charging equipment (EVSE) with a type2 connector . PE Pre-Test......
Guilin Huayi Peakmeter Technology Co., Ltd.
|
ISO 8092 Automobile Wiring Harness Load Comprehensive Test Bench
|
...Test Bench Automotive Wire Harness Load Integrated Testing Station Product Description Scope of Application Complies with ISO 8092.1 - 4 series standards and QC/T 417.1 - 417.5 - 2001 standards for vehicle electrical wiring harness connectors, etc. Testing Function 1. 8-wire voltage drop detection, equipped......
DONGGUAN LONROY EQUIPMENT CO LTD
|
SMA Male Custom Cable Assemblies With Simi Flex 141 Cable For Unmanned Aerial Vehicle
|
...: SMA Connector Male Application: 1. Wireless industries 2. Communication equipment 3. Base stations 4. Telecom 5. Test and measurement Specification A. Electrical Characteristics Frequency DC~3GHz Impedance 50 ohm S.W.R 1.5MAX @ 0~3GHz Return Loss >...
Dongguan Boges Communication Technology Co., Ltd
|
Quick EVSE Charging Station 22kw Home Charger Type2
|
Product Description: Our EVSE Charging Station is designed to provide a convenient and safe recharging solution for electric vehicles. This charging station is equipped with IEC62196-2 Type2 connector and supports an input voltage of AC 240V. With a ......
Beijing Ruiqihongye Electrical Equipment Co., Ltd.
|
