IP2X Test Finger Probe with 50N Thrust
|
... of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Jointed Test Finger was made on stainless steel and Polyamide handle. Material: Stainless Steel. Handle: Polyamide. Finish:...
HK LEE HING INDUSTRY CO., LIMITED
|
IEC 60529 IP2X Jointed Test Finger Probe R2 Cylindrical Length 80mm
|
... standard. The IEC 60529 IP2X Jointed Test Finger Probe is intended to verify the basic protection against access to hazardous parts. It’s also used to verify the protection against access with a finger. Conforms to: This is the “international”...
Dongguan Kingpo Technology Limited
|
iec 60529 IP2X code jointed test finger probe , access test probe, safety test
|
... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision....
ALLIED TESTING (HK) CO.,LTD.
|
New Condition ISO17025 12.5mm IP Test Finger Probe IEC60335
|
...Test Probe Kits IP Test Finger Probe Packed in Silver Box 1. Introduction: The test probe kits are used to verify the degrees of protection stiulated in IEC60529, includes 50mm test sphere for IP1X testing, jointed test finger probe and 12.5mm test sphere for IP2X testing. 2. Specification Jointed test finger 1). Introduction: Jointed test finger......
Pego Electronics (Yi Chun) Company Limited
|
IEC 60335 Test Finger Probe Kit
|
...Test Probe Kit Electric Safety Check Device List: IP1X Test Probe A IP2X The Standard Test Finger Probe IP3X Test Probe C IP4X Test Probe D IEC60335 Test Probe A Specification: IP1X Probe A /Test Probe A 1, According to: IEC61032:1997 /IEC60529:2001 and UL 2, IP1X Probe A (Test Probe A) is necessary appliance for household and similar electrical appliance of against electric shock protection test......
Guangzhou Shice Equipment Co., Ltd.
|
HT-I06 12.5mm Diameter Sphere Figure 6 Test Finger Probe 2
|
... 2. IEC 60529 Degrees of protection provided by enclosures (IP Code) IP2X IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ Application: This sphere is intended to verify the degree of protection of...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC60335-2-14 Test finger Probe With Diameter 125mm Circular Stop Face Probe Length 100mm
|
...Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 clause 20.2. Application of Test Finger Probe: This probe is intended to verify the stability and mechanical hazards of blenders. Test sample of Test Finger Probe: Blenders. Feature of Test Finger Probe: A test probe similar to that of test probe......
Guangzhou HongCe Equipment Co., Ltd.
|
Test Finger Probe
|
... parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the...
shanghai kerang technology co ltd
|
Test Probe 11 , IEC61032-Figure 7 Test Finger Probe , Unjointed Test Finger
|
... 4, Dam- board Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1. Aluminium box and carton box, careful and tight package, make sure the ......
KingPo Technology Development Limited
|
Finger diameter 5.6mm ISO 8124-1 Standard Test Finger Probe for toys
|
...ts of toys can be touched. If it is accessible, then conduct the related test according to standards so as to reduce the damage hazards for children. This tools include 2 models: Probe A and Probe B: 1. An accessible part for a toy or article intended for...
Gester International Co., Ltd
|
Submit your “ip2x test finger probe” inquiry in a minute :