IEC 60068-2 Vertical Low Energy Pendulum Impact Test Device For Plugs And Sockets
|
... according to the standard of IEC 60884-1:2022, IEC60068-2-75, and etc. Sample: It is suitable for the mechanical strength test of electrical accessories such as plugs and sockets for household and similar purposes, surface-mounted installation boxes,...
Sinuo Testing Equipment Co. , Limited
|
EN IEC 61851-1 Electric Vehicle Charging Interface Pendulum Impact Test Device
|
...Pendulum Impact Test Device Complied Standards & Clauses for Electric Vehicle Charging Interface Pendulum Impact Test Device This Electric Vehicle Charging Interface Pendulum Impact Test Device complied to EN IEC 61851-1-2019, IEC 61851-1-2017,12.11, IEC60068-2-75:1997 and IEC62262:2002. Technical Parameters for Electric Vehicle Charging Interface Pendulum Impact Test Device......
Sinuo Testing Equipment Co. , Limited
|
IK10 impact hammer, pendulum impact test device,impact tester
|
...impact hammer, pendulum impact test device,impact tester To verify IK10 resistance, one impact of 5kg mass dropped from 400mm above the affected surface is necessary. “The Standard EN 62262 provides a maximum resistance of IK10 = 20 joules with the possibility of extending the test to 50 joules. Please verify our other Strikes Elements with different mass and launching tubes.” Ik Code No. Energy......
ALLIED TESTING (HK) CO.,LTD.
|
2J Below Pendulum Impact Test Apparatus 150g Impact Element For Plug / Socket
|
...Pendulum Impact Test Apparatus with 150g Impact Element 12 Month Warranty 1. Introduction The pendulum impact test apparatus is Low energy pendulum impact device below 2J, it is consisted by test appartus, impact hammer, sample mounting support and hard wooden block. An impact......
Pego Electronics (Yi Chun) Company Limited
|
ISO179 Charpy Pendulum Impact Resistance Tester Notched Impact Test Device
|
... screen. The instrument has convenient man-machine dialogue, high accuracy, automatically displays the impact energy, automatically calculate the impact strength, and automatically calculate the average impact strength of the whole sample, and the data can...
Beijing Jinshengxin Testing Machine Co., Ltd.
|
Low Pressure Feed Pipe Pendulum Impact Testing Machine With Air Clamper
|
Low Pressure Feed Pipe Pendulum Impact Testing MachineAir Clamper characteristic: This series of testing machine is pendulum type host structure, by measuring the difference between the potential energy before the impact of the pendulum and the residual potential energy after the impact to calculate the absorption of the impact......
Guangdong ALI Testing Equipment Co,.Ltd
|
IEC62262 Mechanical Strength Tester On Sheet Metal / Pendulum Impact Test Apparatus For Energy Impact Test
|
...Pendulum Impact Test Apparatus For Energy Impact Test Product details: This testing device conforms to IEC62262. It is used for the mechanical strength test of the sheet metal like the substation ark and the metalloid electric energy metering cubicle. The mounting bracket and the angle of impact are adjustable. This device is for the energy impact test (the energy......
KingPo Technology Development Limited
|
IEC62262 Mechanical Strength Plug Socket Tester Pendulum Impact Test Apparatus
|
Pendulum Impact Test Apparatus For Energy Impact Test Product details: This testing device conforms to IEC62262. It is used for the mechanical strength test of the sheet metal like the substation ark and the metalloid electric energy metering cubicle. The mounting bracket and the angle of impact are adjustable. This device is for the energy impact test (the energy is more than 2J). Technical parameters: Pendulum......
Guangzhou HongCe Equipment Co., Ltd.
|
Metallic Materials Charpy Pendulum Impact Testing Machine JJG 145
|
...er dynamic load in order to judge the properties of the material under dynamic load. The difference between the front energy of the pendulum and the remaining energy after the impact is displayed on the dial to obtain the absorbed work of the sample. The...
Perfect International Instruments Co., Ltd
|
750J Pendulum Impact Testing Machine
|
...Pendulum Charpy Impact Testing Machine Charpy Impact Testing Machine Technical indicators: 1. Impact energy: 300J (sledgehammer) 150 (small hammer) 2. Impact speed: 5.2m / s 3. Pre-lifting angle of pendulum: 150 ° 4. Span of sample support: 40mm 5. Round corners of support jaw: R1.0 ~ 1.5mm 6. Fillet of impact blade: R2.0 ~ 2.5mm R8mm 7. The distance from the center of the pendulum to the impact......
BOTO GROUP LTD
|
Submit your “low energy pendulum impact test device” inquiry in a minute :