IEC 60598-1 Clause 4.14.1 Test E Spring Clamp Luminaires Test Device For Luminaires Test
|   | 
                                            ...Test E Spring Clamp Luminaires Test Device For Luminaires Test Product information: Standard: IEC60598-1:2020 "Luminaries-Part1: General requirements and tests" clause 4.14.1 test E Specimen and limitations: Spring clamp mounted luminaires Test purpose: Used to test the clamping strength of spring clamp-mounted luminaires to verify the safety of the clamping connection Test principle: In this test......                                         
                                            Sinuo Testing Equipment Co. , Limited
                                         
 | 
Clip Mounted Luminaires Test Device IEC60598-1 Clause 4.14.1 10mm Thickness
|   | 
                                            ... for the pull force test of clip-mounted luminaires. Test requirements: 1). A pull is applied on the cable without jerk for 1 min in the most unfavourable direction in normal use. During the test the clip is mounted on standard test "shelves" made of...                                         
                                            Pego Electronics (Yi Chun) Company Limited
                                         
 | 
Luminaires Testing Equipment IEC 60598-2-21 Binding Appratus For Rope Light
|   | 
                                            Luminaries Testing Equipment IEC 60598-2-21 Binding Appratus For Rope Light IEC 60598-2-21 21.7 Binding Apparatus for Rope Light Overview of equipment: The lamp twine rope winding test device is made to meet the test requirements of Chapter 6.14 of IEC ......                                         
                                            SKYLINE INSTRUMENTS CO.,LTD
                                         
 | 
Multifunctional Lab Test Equipment Ground Recessed Luminaires Light Test
|   | 
                                            ... load test to ground accessed luminaires. Test sample: Rated voltage not over 1000V ground accessed luminaires Feature: Simulating to actual environment fix the luminaires, oil cylinder to drive the rubber hammer to applying static load to the lamps and...                                         
                                            shanghai kerang technology co ltd
                                         
 | 
Ground Recessed Luminaires Led Testing Equipment
|   | 
                                            ... 20KN Rubber punch diameter 50mm, thickness 50mm Maintain time 5-10s for torque test, 1min for static load test Station 1 station Standard IEC 60598-2-13 Clause 13.6.1, 13.6.2 Control Mitsubishi PLC Display Touch screen ......                                         
                                            Guangzhou Shice Equipment Co., Ltd.
                                         
 | 
EN60598-1 Expanded Metal Spacer 500x500mm For IP Test Use
|   | 
                                            ... for any separate controlgear. For tests of 9.2.3 to 9.2.11, a fixed luminaire intended for mounting with its body in contact with a surface shall be tested with an expanded metal spacer interposed between the luminaire and the mounting surface. The...                                         
                                            KingPo Technology Development Limited
                                         
 | 
Ground Recessed Luminaires Light Testing Equipment IEC 60598-2-13
|   | 
                                            ...Luminaires Light Testing Equipment IEC 60598-2-13  Production introduction: This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires static load test and torque test......                                         
                                            Guangzhou HongCe Equipment Co., Ltd.
                                         
 | 
PTL Ip67 Led Luminaire Ingress Dust Testing Equipment
|   | 
                                            ...used for checking the proteced against solid foreign objects to verify the degrees of protection IP5X "Dust-protected" and IP6X "Dust-tight" Test equipment The tests are carried out by means of a PTL dust test chamber with a sealed test cabinet, in which...                                         
                                            Xi'An LIB Environmental Simulation Industry
                                         
 | 
ANSI C136.31 - 2010 Vibration Shaker Table For Lighting Equipment Luminaire Vibration Testing
|   | 
                                            ...Luminaire Vibration Testing In the lighting equipment industry, ensuring the reliability and durability of luminaires is crucial. Lighting products are used in a wide variety of environments, from residential settings to industrial facilities and outdoor installations. The ANSI C136.31 - 2010 standard provides specific guidelines for luminaire vibration testing......                                         
                                            Dongguan Precision Test Equipment Co., Ltd.
                                         
 | 
IEC 60529 Verify Protection Against Dust IP Test Equipment
|   | 
                                            Test Device To Verify Protection Against Dust IP Test Equipment Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) clause 13.4, figure 2, dust test for first characteristic number 5 and 6. IEC 60598-1 Luminaires – Part 1: General requirements and test clause 9.2 test for ingress of dust, solid objects and moisture. Standard description of IEC 60598-1: Dust-proof luminaires (first characteristic IP number 5) shall be tested...                                         
                                            HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
                                         
 | 
