High Effective Melt Flow Tester For Fluorine Plastic
|
... plastic, which is designed and produced according to the standards like GB/T3682-2000, ASTM D1238-98, JB/T5456, ISO1133, etc. When measuring ......
Beijing Jinshengxin Testing Machine Co., Ltd.
|
KJ-3092 Melt Flow Index Equipment , Fluorine Plastic Din Abrasion Tester
|
...-97, ASTM1238, JIS, ect.. It is used in polyethylene, polypropylene, polystyrene, ABS, polyethylene amide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate, and other plastic materials, to measure MFR and MVR....
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
MFR Melt Flow Index Machine , Electronic Plastic Testing Instrument
|
...Melt Flow Index Machine , Electronic Plastic Testing Instrument Brief introduction 1.Purpose: Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermoplastic melt flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow......
Dongguan Haida Equipment Co.,LTD
|
Melt Flow Index Machine , Point Load Tester Equipment, ApplyingTo Plastic
|
...Melt Flow Index Machine , Point Load Melt Flow Index Tester Equipment Gold Brand Melt Flow Index Tester Uses: This machine applies to both molten high temperature of the PE, gather fang PSF, fluorine plastic, nylon engineering plastic, also suitable for polyethylene, polypropylene polystyrene, ABS resin, pom resins melting temperature lower plastic tests. Gold Brand Melt Flow Index Tester......
Dongguan Liyi Environmental Technology Co., Ltd.
|
Electronic Loading Plastic Test Machine Melt Flow Index Tester MFR / MVR Tester
|
...Melt Flow Index Tester MFR/MVR Testing for Plastic Discription This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics......
DONGGUAN LONROY EQUIPMENT CO LTD
|
ASTM D1238 MFR Tester Polymer Flow Rate Analyzer Plastic Melt Flow Index Test Machine
|
.... The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate....
SKYLINE INSTRUMENTS CO.,LTD
|
Anticorrosive Melt Index Tester Inner Holeф9.55±0.025mm Temperature Range 80℃～400℃
|
...ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Melt Index Tester To meet the...
Dongguan Lixian Instrument Scientific Co.,LTD
|
High Precision MVR MFR Electric Plastic Melt Flow Index Tester For Plastic Test
|
... every 10 minutes when various plastics and gums pass through a certain temperature and load in a viscous flow state. It is suitable for melting high temperature polycarbonate, poly sulfoxide, fluorine plastics, nylon and other engineering plastics. Also,...
Guangdong Guangce Instrument Technology Co., Ltd
|
AC220V±10% 40ºC-450ºC Melt Flow Index Tester Machine For Mask Melt Blown Materials Volume Testing Method(GW-108)
|
...Melt Flow Index Tester Machine For Mask Melt Blown Materials Volume Testing Method(GW-108) Product introduction: It is used to measure the temperature and load of various plastics and resins in the state of viscous flow, and the melt flow rate MFR value of the standard die every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, and fluorine with a high melting temperature. Engineering plastics such as plastics...
Dongguan Guo Feng Testing Machine Co., Ltd.
|
LIYI Plastic Rubber Melt Flow Index Meter, MFI, Melt Flow Index Testing Equipment, Melt Flow Index Tester
|
..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2....
Dongguan Liyi Environmental Technology Co., Ltd.
|
Submit your “melt flow tester for fluorine plastic” inquiry in a minute :