0-10mmx0.01mm Metric Dial Indicator with Golden Bezel for Accuracy Measuring
|
.... 5. Rotational bezel with clamp for easy zero set. 6. Interchangeable hardened contact point. 7. Easy to read and operate, high sensitivity and accuracy. 8. Aluminum or chromate-plated steel available. 9. Flat back or back lug for mounting purposes....
Deko Corporation
|
3 Micro Ceremics Height Gauge With Dial Indicator
|
Usage To measure the Depth, Height, Flatness and Parallelism of work pieces Feature Excellent functionality and easy operation Data out MM/INCH models High durability and high accuracy are ensured by an improved column design Standard with Ceramics base ......
Leader Precision Instrument Co., Ltd
|
Laboratory Precision Measuring Devices Test Indicator Inch\Metric
|
Laboratory Precision Measuring Devices Test Indicator Characteristic: Easy and accurate measurement for inner and outer diameter, which is narrow, recessed, and difficult to measure. Using a special device to achieve the automatic conversion of measuring ......
Xian Mager Machinery International Trade Co., Ltd.
|
ISO4210 Bicycle Strollers Testing Machine , Rotation Accuracy Test Machines
|
... Testing Machine , Rotation Accuracy Test Machines Products image Product introduction: It used to measure the radial runout and wheel axial runout, when measuring the workpiece fixed, the dial indicator points to be measured indenter position, turn the ......
Dongguan Haida Equipment Co.,LTD
|
BS EN 12983-1 Bottom Concavity Measurement Instrument For Measure The Concavity 10mm
|
...Measurement Instrument For Measure The Concavity Product Information For Bottom Concavity Measurement Instrument: The Cookware Bottom Concavity Measurement Instrument complies with EN 12983-1:2020, annex Q.2.11. It is used to measure the concavity of the bottom of the pot (thermal shock deformation). Technical Parameters For Bottom Concavity Measurement Instrument: A. Dial indicator accuracy 0.01mm B. Measuring...
Sinuo Testing Equipment Co. , Limited
|
KM Electronic Digital Indicator
|
Specifications 0-10mmElectronic Digital Indicator 1)Zero setting 2)Metric/lnch conversion 3)With data output interface. 4)CE,ISO9001:2008 0-10mmElectronic Digital Indicator 1)Zero setting at any position. 2)Metric/lnch system conversion at any position......
KM HARDWARE ASIA LIMITED
|
Dry Film Coating Thickness Gauge Elecronic TG8828 Paint Thickness Measuring Instrument
|
.../eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolutio: 0.1/1 Accuracy: ±1-3%n or ±2.5um Min. measuring area: 6mm Min. sample thickness: 0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4...
HUATEC GROUP CORPORATION
|
5mm Inspection Size Coating Thickness Meter TG8829 with the Measuring Range 0 - 1250um
|
... range: 0-1250um/0-50mil Resolution: 0.1/1um Accuracy: ±1-3%n or ±2.5um Min. measuring area: 5mm Min. sample thickness: 0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4)battery Auto power off...
HUATEC GROUP CORPORATION
|
Dial Nylon Shore Durometer / Plastic Digital Rubber Hardness Tester Iso9001
|
... material which includes vesicant when the compression ratio is 50%, the stress above 0.5kg/cm2. It also can be used in other similar hardness materials. Character Needle indicates, easy to read, high accuracy. Dual needle, after test the top...
TMTeck Instrument Co., Ltd
|
High Precision Ultrasonic Thickness Gauge/Echo to Echo mode/Steel Thickness Measurement RTG-600
|
...LOW AS 0.15mm or 0.006 inch DISPLAY UNITS : IMPERIAL and METRIC AUTOMATIC SELF CALIBRATION COUPLANT INDICATOR AUTOMATIC POWER OFF DEVICE HIGH-LOW LIMIT ALARM LCD BRIGHTNESS ADJUST LOW BATTERY INDICTOR TECHNICAL SPECIFICATIONS Measuring Range (for steel)...
RAYTECH NDT INSTRUMENT CO.,LTD
|
Submit your “metric dial indicator for accuracy measuring” inquiry in a minute :