30 Watts 3.8GHz N Male High Power Electronic Dummy Load For RF system
|
...Male Dummy Load RF Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load...
HeFei Vinncom Science And Technology Co.,LTD
|
DC-6GHz 10W Dummy Load / Termination Load N Male for Connection
|
DC-6GHz 10W Dummy Load /Termination Load Satisfying ROHS Compliance Wide band Good VSWR VN-LD-6G-10W-ONm-R.pdf Part Number VN-LD-6G-10W-ONm-R Operating Frequency ( MHz ) DC-6000 Impedance ( Ohm ) 50 VSWR ≤1.25 Application Indoor Operating Temperature ( ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
N male Connector Termination dummy load N-50JR-18A
|
RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ......
Terui International Group Co.,Ltd.
|
Female Open Male Open Full One-Port Calibration SMA-K Calibrator SMA - SMA Cal Kit Testing
|
... load ＜-32dB(Return Loss) Material Gold-plated brass Connecting Interface SMA Torque value 0.9 N/m The idea is to create correction data for the cheap SMA cal kit by measuring the cal standards after the ......
Shenzhen Hicorpwell Technology Co., Ltd
|
Submit your “n male dummy load for connection” inquiry in a minute :