30 Watts 3.8G DIN Male RF Dummy Load Termination
|
...Male RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load...
HeFei Vinncom Science And Technology Co.,LTD
|
30 Watts 3.8G DIN Male RF Dummy Load Termination
|
|
...Male RF Dummy Load Termination Wide band Good VSWR Good water resistance Part Number VN-LD-4G-30W-ODm Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×37dBm) -110 / -120 Application Indoor & Outdoor Degree of Protection IP65 Operating Temperature ( ℃ ) -40 ~ + 80 Interface Din Male......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
DC-3.0GHz 20W SMA Male Connector Dummy Load Termination Loads RF Terminal Load 50ohm
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) 350-6000 VSWR......
Anhui Bonfire Technology Co., Ltd
|
DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm
|
...Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. N male......
SHENZHEN ZD TECH CO., LTD
|
100 Watt RF High Power Dummy Load Din Male Connector 160dBc PIM VSWR 1.2 IP 67
|
...Load Dummy Load 4.3 - 10 or Din Male Connector 160dBc PIM Description: 1. 200w high power RF load , the PIM is 150-160dBc .With very good performance . 2. The VSWR is <1.2 3. Intermodulation is 150-160dBc@2X43dBm 4. IP 67 , outsider , good waterproof. 5. Connector :4.3-10 male Specification: Type No. Load......
Lenolink Telecommunication Co.,Ltd
|
0.5watt RF Coaxial Connector SMP Dummy Load Terminator 40GHz 50Ohm
|
...Dummy Load Terminator 40GHz 50Ohm Optional Factory Supply Xi'an Elite Electronc ‘s SMP Male RF Load – Termination is a Push On designed that offers 50Ohm impedance and is rated for a maximum frequency of 40GHz. The low-power matched RF load designed and produced by Xi'an Elite Electronics has an impedance of 50Ω, including SMA, SSMA, SMP, SSMP, CSMP, N, TNC, K2.92mm and other male......
Xi'an Elite Electronic Industry Co., Ltd.
|
F Male Terminator, RF Dummy Load
|
F Male Terminator, RF Dummy Load 1. Low cost 2. ISO 9001 & TS 16949 certified 3. RoHS & REACH compliance 4. Made in China Features: Excellent insertion/withdrawal ......
Changzhou H .N . Electronic Co., Ltd.,
|
Brass 2 Watt RF Load Termination 18GHz Dummy Load 50 Ohm
|
2Watt SMA 18GHz coaxial Termination Zysen's 2W Wideband (DC-18 GHz) terminations available with 50 impedance SMA Male & Female connectors. With Great VSWR 1.15 Typ. Electrical Specifications Frequency Range DC – 18GHz Power 2W CW at 25°C (Derated linearly......
Chengdu Zysen Technology Co., Ltd.
|
N male Connector Termination dummy load N-50JR-18A
|
RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ......
Terui International Group Co.,Ltd.
|
Female Open Male Open Full One-Port Calibration SMA-K Calibrator SMA - SMA Cal Kit Testing
|
... load ＜-32dB(Return Loss) Material Gold-plated brass Connecting Interface SMA Torque value 0.9 N/m The idea is to create correction ......
Shenzhen Hicorpwell Technology Co., Ltd
|
Submit your “n male spinner dummy load” inquiry in a minute :