Sign In | Join Free | My burrillandco.com
1-10 Results for

non accessibility test

from 2109 Products

Non-Accessibility Test for Power Electronic Converter Systems Part 1 Safety Requirements

China Non-Accessibility Test for Power Electronic Converter Systems Part 1 Safety Requirements on sale
Test Object: Safety requirements for power electronic converter systems and equipment – Part 1: General Item/Parameter: Non-accessibility test Standard or Method: SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT –Part 1: General IEC......
Shenzhen LCS Compliance Testing Laboratory Ltd.

Address: 101, 201 Building A and 301 Building C, Juji Industrial Park, Yabianxueziwei Shajing Street, Baoan District, Shenzhen, 518000, China

Gauge For Checking Non - Accessibility Of Live Parts , Through Shutter

China Gauge For Checking Non - Accessibility Of Live  Parts , Through Shutter on sale
...Non-accessibility of Live Parts, Through Shutter Product information: These two test probes separately confirm to the IEC 60884-1:2013 clause 10.5, figure 9 and figure 10. The SN2110 test probe with 20N force is used to test whether the live parts inside can be touched. The SN2110-A test probe with 1N force is for testing whether the live parts with the protection of socket can be touched. Technical parameters: 1. Test......
Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC60884 Figure 10 ,Gauge for checking non-accessibility of live parts, through shutters

China IEC60884 Figure 10 ,Gauge for checking non-accessibility of live parts, through shutters on sale
...checking non-accessibility of live parts, through shutters, and of live parts of socket-outlets with increased protection. After 20N gauge test, this gauge then applied with a force of 1N and in three directions, for approximately 5s in each of the three...
KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC Test Finger Probe Kit Metal / Insluating Material For Accessibility Testing

China IEC Test Finger Probe Kit Metal / Insluating Material For Accessibility Testing on sale
... to verify adequate clearance from hazardous parts. Object probe: a test probe simulating a solid foreign object to verify the possibility of ingress into an enclosure. IP code probe: a test probe to verify the degrees of protection specified in IEC60529....
Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

SASO/IEC 60335-1, SASO IEC 60950, IEC 60950/EN60950 Non-Jointed Test Finger

China SASO/IEC 60335-1, SASO IEC 60950, IEC 60950/EN60950 Non-Jointed Test Finger on sale
...Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The...
HK LEE HING INDUSTRY CO., LIMITED

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

Building Material ISO 1182 Non Combustibility Testing Machine BS 476-4-11

China Building Material ISO 1182 Non Combustibility Testing Machine BS 476-4-11 on sale
...non-combustibility of the main components of homogeneous building products and non-homogeneous building products under specific conditions. This instrument belongs to the building combustion performance classification test instrument. When the equipment is...
Chongqing gold mechnical and electrical equipment Co., Ltd

Address: 25F, China Resources Building, Xiejiawan, Jiulongpo District,Chongqing,400050,China

EN71 Test Round Rod for Test Moving Parts Clearance and Accessible Tests

China EN71 Test Round Rod for Test Moving Parts Clearance and Accessible Tests on sale
...: The round rods of the standard requirements are inserted into the gap of the toy to be tested. If it can be inserted, it is judged to be accessible. Standard test: EN71. Parameter: Specifications: diameter is 3mm, 5mm, 7mm, 12mm; tolerance: +-0.5mm....
SKYLINE INSTRUMENTS CO.,LTD

Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China

HFV-600C Non Destructive Testing Equipment Above 0.9 Surface Uniformity for Accurate Testing

China HFV-600C Non Destructive Testing Equipment Above 0.9 Surface Uniformity for Accurate Testing on sale
... size, light weight, low power consumption, uniform brightness, continuous adjustment and convenient carrying. Technical Parameters: Product Name Non Destructive Testing Equipment Luminance 300000cd/㎡(800000Lux)...
HUATEC GROUP CORPORATION

Address: 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096

Jointed child Finger Probe, test finger probe,safety access test probe,test probe

China Jointed child Finger Probe, test finger probe,safety access test probe,test probe on sale
... size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes made in exact accordance with IEC 61032, Figures 12 and 13. The child&#......
ALLIED TESTING (HK) CO.,LTD.

Address: Unit 04,7/F,Bright Way Tower,No,33 Mong Kok Road Kowloon,HK.

Floor Thickness Detector Non Destructive Testing Equipment 5 Inches Screen

China Floor Thickness Detector Non Destructive Testing Equipment 5 Inches Screen on sale
...non-destructive testing method for testing the thickness of concrete or other non-ferromagnetic media; in use, the launch and receive probes are placed on opposite test surfaces of the floor. , respectively, transmitting and receiving electromagnetic fields, the instrument tests......
Jinan Wang Te Bei Equipment Co., Ltd.

Address: Room 209, No.6 Weihua West Road,Shizhong District,Jinan,250000,Shandong,China

Submit your non accessibility test inquiry in a minute :
*From:
Your email address is incorrect!
To:

Jinan Wang Te Bei Equipment Co., Ltd.

Products: Floor Thickness Detector Non Destructive Testing Equipment 5 Inches Screen

*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details:
  • --Self introduction
  • --Required specifications
  • --Inquire about price/MOQ
Your message must be between 20-3,000 characters!
 
Please reply me within 24 hours.
Yes! I would like your verified suppliers matching service!
Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.
Submit non accessibility test inquiry
*From:
Your email address is incorrect!
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details:
  • --Self introduction
  • --Required specifications
  • --Inquire about price/MOQ
Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!