AVOGO-FBR Series Optical Sensor 4505Z Ports With Optical Fiber Cable For Test Machine Connection
|
Optical Sensor AVAGO-FBR-4505Z Ports With Optical Fiber Cable For Industrial Equipment Test Machine Connection Features: ● Anti-electromagnetic interference and electromagnetic radiation ● Good flexibility, anti-vibration, can ensure zero error rate ......
ShenZhen Ruiara Co., Ltd
|
IEC 60794-1-21-2015 Cable Bending Test Machine 90° Bending Durabity Optical Fiber Tester
|
Machine Introduction This equipment is suitable for testing the ability of optical cable to withstand repeated bending, by applying repeated bending force, for qualified optical cable requires that the optical fiber is not broken, the attenuation change of the optical fiber does not exceed the value specified in the optical cable product standard, and the optical cable sheath does not crack. Test......
SKYLINE INSTRUMENTS CO.,LTD
|
Low Noise Cable Bending Testing Machine With Panasonic Servo Motor Bending Test
|
... conductor, flat cable and signal line, etc. The test method is as follows: Firstly, clamp one end of the wire rod and fasten it to the rotation clamp. Then have it make a horizontal rotation with hanging load to evaluate whether ......
Infinity Machine International Inc.
|
GR-326 Optical Fiber Mechanical Properties Testing Machine
|
...Optical Fiber Mechanical Properties Testing Machine I-suntop Optical cable mechanical testing equipmen... 1. Usage of GR-326 Optical Fiber Mechanical Properties Testing Machine: Meet the standards: comply with the gr-326 optical fiber connector reliability requirements and the standard requirements of the test method Scope of 2.application: used to test optical fiber, optical fiber mechanical properties test......
Dongguan Wirecan Technology Co.,Ltd.
|
BS 5131 SATRA TM3 Shoe Midsole Fiber Board Bending Test Machine Leather Shoes Bend Resistance Tester
|
... machine is used to test the bending resistance quality of midsole fiber boards of leather shoes, casual shoes, walking shoes and other travel shoes. During the test, the sample is continuously bent left and right by 90 degrees each, until it breaks. The...
DONGGUAN LONROY EQUIPMENT CO LTD
|
Appendix F Of TÜV Rheinland 2Pfg 2577/08.16 Robot Cable Bending Testing Machine
|
... system" Specimen and limitations: Industrial robot cables. Test purpose: Used to test the bending resistance of the power cord of industrial robot cables when entering the joint. Test principle: Using PLC control and servo motor drive, the bending test of...
Sinuo Testing Equipment Co. , Limited
|
Optical Fiber Cable Connector Crimping Machine High Precision Air Pressure
|
... and more convenient 2.ST, SC (upc, apc), LC (upc, apc), FC (upc, apc) can be used universally, different types of fiber ports are suitable for different types of fiber optic connector assembly and crimping 3.The...
Shenzhen Chuanglixun Optoelectronic Equipment Co., Ltd.
|
10-60 Times/Min Cable Flex Tester , 6 Station Cable Bending Testing Machine
|
...Cable Flex Test Equipment 6 Station 10~60 Times/Min Description: UL817 IEC60335 cable bending testing machine can test six cables or cord sfitted with plugs simultaneously. This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
UL1685 Lab Testing Machine, Electrical and Optical-Fiber Cables Flame Test Apparatus
|
DX8297 UL1685 Wire & Cable Burning Test Device Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under specified conditions, and ......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
10~30 Times / Min Optical Cable Testing Machine / Bend Test Machine ±90° Angle
|
Optical cable repeated bending testing machine optic fiber cable repeat beading detector DESCRIPTION The equipment is used to test optical cable resistance repeated bending properties. By applying repeated bending force, for the qualified optical cable, no fiber fracture, fiber attenuation values meet standard, no optic cable jacket cracking. The equipment adopts the man-machine interface and PLC control, TFT true color screen display test...
Anhui Herrman Machinery Co.,ltd
|