IEC 60598-1 Internal Power Cord Bending Test Equipment For Power Cord Of Household Appliances
|
...Power Cord Bending Test Equipment For Power Cord Of Household Appliances Product Information For Internal Power Cord Bending Test Equipment: This flexibility test equipment matches the requirements of clause 23 of IEC 60335-1. It is used to conduct flexing resistance test......
Sinuo Testing Equipment Co. , Limited
|
PLC Control Power Cord Flexing Test Equipment According To IEC60335-1
|
... 23.4 and figure 21, AS/NZS3112 clause 2.13.12.2 and figure 2.2, BS1363-1 clause 19.5 and figure 18. It is widely used in power cord bending and swing testing on power cords, plugs and sockets,...
Pego Electronics (Yi Chun) Company Limited
|
60Hz Plug Cord Cable Testing Equipment Flexing Rate 10~60 Times / Min
|
...Cord Cable Flexing Swivel Testing Machine With Load 6 Workstations IEC60884-1 Product Introduction: HongTong FL-1 Plug Cord Flexibility Tester is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21, which can process 10,000 flexing at a rate of 60 flexing per minute. The test equipment has 6 workstations, thus six cables or cords fitted with plugs can be tested simultaneously. Test Application: The cables...
Guangzhou HongCe Equipment Co., Ltd.
|
Household Appliance Power Cord Anchorage Test Equipment Manually Operation
|
...Power Cord Anchorage Test Equipment Manually Operation Standard: IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements clause 25.15. Application: It is used to test the household appliances supply cord, and appliances intended to be permanently connected to fixed wiring by a flexible cord, shall have a cord anchorage. The cord......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
OEM Power Cord Flexibility Test Equipment With Calibration Certificate
|
... to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved while in operation shall be constructed so that the supply cord is adequately protected against excessive flexing where it enters the appliance....
KingPo Technology Development Limited
|
6 Groups Cable Testing Equipment For Plug Static Pull Test , UL / IEC Standard
|
...Cable Testing Equipment For Plug Static Pull Test For UL And IEC Standard 1.Quick Details: Alternative name Plug-line static tensile testing machine Function testing load strength between the plug terminal and power cord Feature Electric drive Weight 310kg Volume 91×55×99cm Test standard UL-817,IEC, GB 2.Product Summary: Plug-line static tensile testing machine is used for testing load strength between the plug terminal and power cord...
Dongguan Gaoxin Testing Equipment Co., Ltd.,
|
Power Cord UK Plug to IEC Cable (kettle style lead) C13 5m Power cord cable
|
Power Cord UK Plug to IEC Cable (kettle style lead) C13 5m Power cord cable 5A Rated Moulded UK plug 5A Rated IEC Plug British Standards Approved BS-1363/A 3 x 3G 1.00mm2 Rated Cable Standard Uk Plug to IEC (kettle like) plug. Used for powering PC's and printers, as well as a whole range of equipment Detailed specification sheet: Product Name British Power cord Cable......
Shenzhen Aonixun Technology Co., Ltd
|
10-60 C.P.M. Electric Cable Testing Equipment For Cable Bending / Swinging / Loading Test
|
...folding strength. Test method is to sample fixed in the fixture, and add a certain load, test fixture swing around, after a certain number of times, view the break rate; or to not power, see the total number of swing. The machine can automatically count,...
Guangzhou Kinte Electric Industrial Co.,Ltd
|
Cord Bend Test Equipment / Tensile testing machine 10 - 40 mumbers/min Speed
|
... cable forward to the center of the turnplate. Pull the cable vertically with load at rated bending speed, angle and times then to begin the bending test. When the tester stops automatically, check the jacket damage and the breakage rate of conductors....
Infinity Machine International Inc.
|
AC220V 50HZ Power Cord Flexing Test Apparatus With Digital Display
|
...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved...
Dongguan Kingpo Technology Limited
|
