OLP Optical Line Protection Switch For Line Protection And Power Monitoring Fiber Optic Switch
|
... can realize optical power monitoring and automatic switching. In optical communication network, OLP constantly monitors optical power of working optical fiber and standby optical fiber. When the optical power value of working optical fiber is below the...
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
Network Security And Monitoring Fiber Optic Switch D2x2B Dual Bypass
|
...electrical signal to switch the optical path, the excellent design makes the product have the advantages of high stability, high reliability, low loss and low cost, which are widely used in the switching and protect io n of optical network. ◇Features:...
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
Stable Power Supply Fiber Optic Switch , 4 Port POE Ethernet Switch With Auto Uplink
|
Stable power supply Power Over Ethernet POE Switch 4port 10/100M with 1 uplink 100M port Product Description Technical items Description Product Name 4-port 10/100Mbps + 1-port 100Mbps Fiber Product Model OFS-PE-SF1T4-20 Network Protocols IEEE802.3 10BASE......
Shenzhen Optfocus Technology Co., Ltd.
|
1x2 Mechanical OSW Fiber Optic Switch For System Monitoring
|
...Fiber Optic Switch Introduction Olycom's 1x2 Mechanical Fiber Opitc switch is used to turn on and turn off optical signal. The 1x2 Mechanical Fiber Optic Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical......
Shenzhen Olycom Technology Co., Ltd.
|
Smallest Fiber Optical Switch 1x2 Fiber Optical Switch For System Monitoring
|
...channels by redirecting an incoming optical signal into a selected output fiber. GEZHI Photonics’ 1x2 Mechanical Optical Switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as...
Gezhi Photonics Co.,Ltd
|
1X1 Channel Fiber Optical Switch Latching Single Mode
|
...Fiber Optical Switch Latching Single Mode Features: 1. Low insertion loss 2. Wide wavelength range 3. Low crosstalk 4. High stability and reliability 5. Epoxy-free optical path 6. Latching and non-latching Application: 1.R&D in laboratory 2.System monitoring 3.Configurable OADM 4.Metropolitan area networks 5.Component testing 6.Fiber sensor Pins Definitions Pins Defining Optical Route Electricity driving Condition Monitoring......
HTD Fibercom Co., Limited
|
1x8 Polarizing Fiber Optic Switches AC 220V 288mm×260mm×117mm
|
...Fiber Optic Switches AC 220V 288mm×260mm×117mm 1*8 single-mode optical switch is a device with multi-channel optical path switching function, which mainly has the following uses: ▲Multi-channel optical monitoring in optical transmission system; ▲LAN multi-light source/detector automatic switching, light sensing multi-point dynamic monitoring system; ▲ Optical test system for optical fiber, optical......
Guangzhou UC Instruments., Co. Ltd.
|
FC APC Connector Mechanical Fiber Optic Switch Non Latching Control Type
|
... two or more ports that selectively transmits, redirects or blocks optical signals from a given input port to a given output port in an optical fiber transmission line. it widely used for protection, restoration, testing & measurement, and monitoring in...
Shenzhen Unifiber Technology Co.,Ltd
|
Gigabit Monitoring Fiber Optic Network Switch 30 W POE Power STP Protocol
|
...Power Supply 24 RJ45 Port Gigabit Monitoring Switch Fiber Optic Network Switch Descriptions: HY-6224P support PTN industrial ring network technology, using ERPS protocol, STP protocol. With IEEE802.3af/at standard of PoE power supply and Max. 30W power consumption per port, it is perfect for senarios such as express way monitoring and supervisory control. Specifications: Product Name Security Switch......
Sichuan hone technology co.,ltd,
|
Mechanical Fiber Optical Switch 1×2 for FTTH FTTB FTTX Network
|
...Optical Switch Description Name: Mechanical Fiber Optical Switch 1×2 Model Number: 1*2-D-5L-SM-025-15-00 Operating Temperature: -5~70ºC Operating Voltage: 3.0 V Or 5.0V Keyword: Fiber Optical Switch Dimension: L27×W12×H8.2 (±0.2) Warranty: 1Year Certification: CE RoHS FCC Features Compact Size Fast Switching Time Low Insertion Loss High Reliability and stability Specification Protection PON Network Network Monitoring......
Beijing Spacecom Co., Ltd.
|
Submit your “power monitoring fiber optic switch” inquiry in a minute :