2.813 Inch Wireline Lock Mandrel PXX Plug And Prong Running Tool
|
...ht be used to test tubing or to plug tubing to perform repairs or replacement of surface equipment. Equalization is achieved by pulling the equalizing prong from the plug assembly. II.Structural characteristics 1.The PXX plug and prong Running Tool is a...
Ruixin Energy Equipment
|
Wireline Lock Mandrel Bypass Blanking FWG Plug Anti Rust
|
...wireline operation. The Bypass Blanking Plugs are designed with removable mandrels which are positive blank-off services to seal off pressure from above and below. Wireline Lock Mandrel FWG plugs are run in the by pass position to allow the passage of well...
Techcore Oil Tools Co.,Ltd,
|
Alloy Steel Lock Mandrel With Equalizing Prong Housing For Wireline Tools
|
Lock Mandrel with Equalizing Prong Housing For Wireline Tools Lock Mandrel with Equalizing Prong Housing is a combine tools for wireline service, which consists of lock mandrel, PX plug, Prong. When combining a Lock Mandrel assembly to an equalising housing and a PX Plug will be formed. The Lock mandrel with PX Equalizing Prong......
XI 'AN ZZ TOP OIL TOOLS CO.,LTD
|
Various Materials Selection Oilfield Nipple Standard F Type Lock Mandrel Use
|
FNP-2 7/8---FNP-7(FNP Series Nipples), WP 5000-10000psi, AISI4140/9Cr1Mo/13Cr/S13Cr/Inconel. The FNP series nipples are sealing and locking devices matched with the tubing retrievable subsurface safety valves or the bottom blanking plugs. This nipple is ......
Hunan Victor Petrotech Service Co.,Ltd
|
