Accessories of Assisting Tension & Pull Testing - Toys And Textile Test Equipment
|
... TW-240 Three Pronged Clamp Staginess steel, used for testing eyes, nose etc.... Dimension: 105*37*26MM TW-236 Big Mouth Clamp used for assisting pull testing , made from adaption of USA VISE-GRIP 5WR; 7CR; 10CR redo Dimension: 190*49*14MM Material:...
Dongguan Hust Tony Instruments Co.,Ltd.
|
IEC 60598-1 Clause 4.14.1 Test E Spring Clamp Luminaires Test Device For Luminaires Test
|
...Test E Spring Clamp Luminaires Test Device For Luminaires Test Product information: Standard: IEC60598-1:2020 "Luminaries-Part1: General requirements and tests" clause 4.14.1 test E Specimen and limitations: Spring clamp mounted luminaires Test purpose: Used to test the clamping strength of spring clamp-mounted luminaires to verify the safety of the clamping connection Test principle: In this test, a push-pull......
Sinuo Testing Equipment Co. , Limited
|
Snap Button Pull Testing Equipment , Button Snap Pull Tester with FB-50k Force Gauge
|
...prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester applies for compression and tensile testing of small samples(special attachments are available). ASTMD903 servo motor button pull tester Consists of an upper snap clamp, a...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
PLC Control Five Stations Wire Pull Testing Machine For Swing Folding Resistance Test
|
... Pull Testing Machine Product model number: IC2095 Application: The equipment is suitable for multi-core cable, communication cable, headphone cable, flat cable, signal cable, charging cable and other wires for swing folding resistance test. The test ......
Infinity Machine International Inc.
|
2N Resolution Accuracy +/-1%FS Operation Manual Button Pull Test Machine
|
...Pull Test Machine Application Snap Tester, also known as the Button-Pull Test Machine is used to test the breaking or holding strength of snap fasteners attached to garments or toys using prong-ring. The machine also doubles as a Push-Pull Tester to test the tensile or compression strength of small samples. The components of this machine include two clamps......
TESTEX INSTRUMENT LTD
|
Lab Pull Test Machine Tensile Strength Equipment Electronic Tensile Testing Machine Micro Tensile Testing Machine
|
...Pull Test Machine Tensile Strength Equipment Electronic Tensile Testing Machine Micro Tensile Testing Machine Electronic Rubber Tensile Testing Machine Stripping Force Tester Product Description Force Testing Machine adopted the horizontal design ,which has the advantages of compact structure,complete functions,and easy to operate.Adopts pneumatic clamp......
Hai Da Labtester
|
Mechanical Arm 6 Axis Hitbot Z-EFG-R Claw Clamp For Pick Up As Cobot
|
... was founded in January 2015, We focus on discrete industrial automation and process industrial automation, and we can design, develop, install, testing, debug industrial robot, its units and related accessories including fixture, transmission device,...
Xiangjing (Shanghai) M&E Technology Co., Ltd
|
Mechanical Arm 6 Axis Hitbot Z-EFG-R Claw Clamp For Pick Up As Cobot
|
|
... was founded in January 2015, We focus on discrete industrial automation and process industrial automation, and we can design, develop, install, testing, debug industrial robot, its units and related accessories including fixture, transmission device,...
Xiangjing (Shanghai) M&E Technology Co., Ltd
|
Auto Tensile Lab Test Machine Material Interface Performance Pulling Testing Machine
|
...Pulling Performance Testing Instrument Auto Tensile Tester 1.Product Introduction The GA-5Q Material Interface Pulling Performance Testing Instrument is a test instrument used for measuring the interface pulling performance of materials. It has a precise structure and stable performance, featuring pneumatic clamping......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Electrical Power Cords Pull Test Machine , Torque Testing Machine IEC60320
|
...Pulling Force And Torque Testing Machine Product Description: This instrument is based on the GB2099.1, GB4706 and IEC60320 standards, used to test the tensile and torsion tests of various types of electrical power cords, and to assess whether the power cord clamping device is firm. Instrument parameters: 1) Station: 1 2) Pull......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Submit your “pull testing flat claw clamp” inquiry in a minute :