1.6981 21CrMoNiV4-7 Quenchied And Tempered Forged Sleeves Rough Machined
|
1.6981 21CrMoNiV4-7 QuenchiedAnd Tempered Forgings Sleeve Forged Cylinder Rough Machined 1) Short Introduction: Surface Finish:3.2um Ra Or As Required. Forging Reduction Min:3 Or As Required Rought machining or Finis Machining 2) 21CrMoNiV4-7/1.6981 ......
Jiangyin Fangyuan Ringlike Forging And Flange Co., Ltd.
|
Tempered Carbon Steel Shaft Sleeve Forgings for Wind Turbine Gearbox Drive Systems
|
Tempered Carbon Steel Shaft Sleeve Forgings for Wind Turbine Gearbox Drive Systems Tempered Carbon Steel Shaft Sleeve Forgings are precision-engineered components designed to protect and align rotating shafts in steel mill drive systems. Manufactured from medium-carbon steel via open-die forging followed by tempering heat treatment, these sleeves......
Changzhou Tiangong Forging Co., Ltd.
|
1045 18CrNiMo7-6 Heat Treatment Forging Barrel Type Alloy Steel Forging QT 9000MM
|
...Forging Barrel Type Alloy Steel Forging QT 9000MM Products: Alloy steel barrel type forging QT,quenching barrel forging,normalizing barrel forging,tempering barrel forging,sleeve forging QT,oil cylinder QT Carbon steel barrel forging,alloy steel barrel type forging,stainless steel barrel forging,oil cylinder forging......
JIANGSU HUI XUAN NEW ENERGY EQUIPMENT CO.,LTD
|
55CrNiMoV Forged Hot Sleeve Heavy Steel Forgings OD 502mm ID 400mm Length 4850mm
|
... delivery. Specifications: Material Carbon steel, Alloy steel Process Forging – Normalizing & Tempering – Proof Machining- Quenching & Tempering – Precision Machining Standards GB, JIS, AISI, SAE, ASTM/ASME, EN, DIN Weight 3 tons--40tons Test ......
Jiyuan City Kunyuan Forging Co., Ltd
|
41Cr4 / 5140 / 40Cr Round Forged Steel Bar 1-12 M Length 80 Mm-1200 Mm Diameter
|
...forged , forged steel bar, Small MOQ 1.Application: Used to manufacture medium speed and medium load parts after quenched and tempered, such as gear, shaft, worm, spline shaft, centre sleeve, etc. Used to manufacture high hardness surface and wear resistance parts after high frequency case hardening and tempered, such as gear, main shaft, bent axle, mandrel, sleeve......
SHANGHAI UNITE STEEL
|
40Cr Shaft Spacer Sleeve , Forged Excavator Boom Bushings And Pins
|
Product Processes There are 16 processes for making a shaft sleeve: cutting stock—forging— quenching and tempering treatment—rough turning—code printer —oil line processing—hardening— temper —coarse and fine grinding for inner bore—excircle grinding—......
Guangzhou Kaisheng Construction Machinery Parts
|
Quenched And Tempered Shaft Steel Rolling Mill Open Die Forgings For Machinery
|
Stainless steel alloy steel open die forgings forged shaft mill roll for machinery Vanforge is a supplier of open die forgings, seamless rolled rings, and contoured rolled rings up to 200"/5080mm outside diameter. Forging shapes include discs, hubs, blocks......
Suzhou Vanforge Metals Co., Ltd.
|
Heavy Plated Forged Steel Rolls furnace hearth rolls table roll
|
... treatment→Packing →Shipping O Product Description Production Capabilities Sleeve & Ring Hubs & Disks Shaft & Rolls Forged Bar & Block OD max 1700 mm D max 1600 mm D max 100 mm D max 650 mm ......
BEIJING SINO STEEL ENGINEERING & EQUIPMENT CO., LTD.
|
US Type Turnbuckle Forged Jaw Steel 3/8" 1040lbs Capacity
|
... to rigging hardware that can not be opened, an eye bolt for instance. Product details Model P-US-T Units US Type Turnbuckle Category Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each...
Wuxi Hanyu power equipment co.,ltd
|
Wear Resistant Hardened Steel Sleeve Bushing Bearings 50x65x50 50x70x50
|
...Forged Excavator Bucket Pin Bushing Bearing 50*65*50 50*70*50 1) Tempering:48-52 bucket bush 2) excavator and bulldozer bucket bush 3) 40Cr 45# bucket bush 4) high-strength bucket bush 5) bucket bush -strict production steps Performance Index Data Product Name Construction Machinery Parts Hardened Steel Sleeve......
Guangzhou Hengli Construction Machinery Parts Co., Ltd.
|