6mm-50mm NDT Testing Equipment Rebar Location System for rebar diameter / distribution
|
NDT Test Equipment Rebar Location System To Test Rebar Diameter, Distribution, Coating Thickness In Concrete. NDT Test Equipment Rebar Location System Use Lemo Connector Clip SYR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete. NDT Test Equipment Rebar Location System Specification
Beijing Samyon Instruments Co., Ltd.
|
Rebar position test , concrete thickness test, rebar diameter test and rebar corrosion degree test
|
...NDT Instrument Concrete Hammer Test Accurately Features Integrate the functions of rebar position test , concrete thickness test, rebar diameter test and rebar corrosion degree test into one product. Product usage Testing concrete cover thickness Test concrete member internal reinforcement position, rebar......
HUATEC GROUP CORPORATION
|
HLC210 Colorful Graphics Display Concrete Rebar Corrosion Detection Test Hammer
|
... rebar corrosion degree with 9-level grey or colorful graphics 3.Measured data is inputted to PC software from USB interface. 4. Easy to operate, have concise software interface, have powerful analytical processing, can obtain testing report directly....
HUATEC GROUP CORPORATION
|
DT-6234B NDT Testing Equipment Photoelectric Tachometer 250mm
|
...NDT Testing Equipment Photoelectric Tachometer 50mm~250mm Fast and accurate RPM and surface speed measurements. 6234B Digital Tachometer provides fast and accurate Non-contact RPM and surface speed measurements of rotating objects. Features of DT-6234B Photoelectric Tachometer Photoelectric RPM testing......
Shaanxi Sibeier(Sbe) Electronic Technology Co., Ltd.
|
Ultrasonic NDT Testing Equipment Eddy Current Inspection Equipment
|
Ultrasonic testing and eddy current testing system Features The workpiece rotated at one place , can reduce the shake ,and the moving speed of the probe holder can be adjustment , so it is better to control the testing quality . Can be applied to a variety......
XIAMEN COBE NDT TECHNOLOGY CO.,LTD
|
4 Channel SAEU3H NDT Testing Equipment With Network Module Card
|
4 channel SAEU3H Acoustic Emission System with network module card for NDT Testing Hard disk parameters of 4 channel SAEU3H Acquisition frequency The maximal acquisition frequency is 10M dolt/s, sample rate can be adjusted continuously, and each channel......
Shanghai Liangui Technology Co., Ltd.
|
Rebar Tensile Strength Test Equipment
|
... of materials, components, and finished products. It is widely used in controling material quality. Application Industries Textile Fabrics Tensile Strength Testing Machine/Tester Price is widely used in most of industries:...
jinan hardness STING EQUIPMENT CO., LTD
|
ASTM D2809 Cavitation Corrosion And Erosion Corrosion Characteristics Test Equipment
|
...test method of Cavitation Corrosion and Erosion-Corrosion Characteristics Test Equipment is: pump the sample with a standard aluminum automobile water pump, run it for 100h under the conditions of 113 ºC, 103kpa and pump speed of 4600r / min, and then check the water pump to determine the degree of cavitation corrosion, and grade it according to the grading system table. Characteristic 1. The Cavitation Corrosion......
Advanced Instruments Co.,Limited
|
IEC 62196-1 Air Saturated Test Chamber Rust Corrosion Steam Testing Equipment For Plug Testing
|
... 30. It is used to accelerate rusting and corrosion in metal components such as plugs, screws, and EV charging connectors after ammonium chloride immersion. By simulating saturated water vapor environments, it provides highly reliable test results for...
Sinuo Testing Equipment Co. , Limited
|
ASTM C805 DIN Concrete Strength Test Hammer Standard Ndt Testing Equipment
|
Concrete Test Hammer Standard Concrete Testing Equipment Standard: EN 12504 PART 2 ASTM C805 DIN 1048 BS 1881:202 NF P18-417 Features: The imported high-quality Korean SWP piano spring has good anti elasticity and anti fatigue performance; NBR seal dust ......
Hebei Better United Import And Export Co., Ltd.
|
