ISO 4643 5423 Shoe Bending Testing Machine SATRA TM92 Shoe Soles Flex Resistance Tester
|
... (pieces). The samples are mounted on the testing machine and flexed at a certain angle and frequency. The crack (opening) and adhesive separation length of the sole and welt after a certain number of flexes are measured, and the changes in the upper are...
DONGGUAN LONROY EQUIPMENT CO LTD
|
Ross Rubber Shoe Sole Flexing Resistance Shoes Testing Equipment
|
...mainly used for the flexing resistance test of rubber shoes sole by continuous flexing. Put the sole into the Ross tester and make the cut above the center of the spindle. After the set testing times of right-angle bending, check the elongation of the cut....
Dongguan Gaoxin Testing Equipment Co., Ltd.,
|
90° EN ISO 20344 Bending Whole Leather Shoes Sole Flexing Resistance Testing Machine
|
...Shoes Sole Flexing Resistance Testing Machine Product Description: Whole Shoes Sole Flexing Test Machine is used to determine the resistance of materials to cut growth during repeated flexing. It’s especially applicable to outsoles of footwear including sole......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Wear Resistant Footwear Testing Equipment For Shoes / Sole Abrasion Resistance Tester
|
Professional Shoes and Sole Abrasion Footwear Testing Equipment With GB/T 3903.2 Description: The shoe wear testing machine is used for wear resistance of shoe soles and molded bottom. The test method: first press the rotating wheel vertical on the sample......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
SATRA TM161 Footwear En Shoe Sole Bending Flexing Resistance Tester
|
... some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length....
Gester International Co., Ltd
|
120W Shoe Sole Flex Tester Bend Speed 140 Times Per Minute 90° Bending
|
...Shoe Sole Flex Tester,Bend Speed 140 Times Per Minute And 3group Test Class Number Product introduction Shoe Sole Flex Tester is to test the use life after the sole flexed. The sole may break or craze after long-time roller bending. When using this machine, impale several holes at the place where has max bending rate, then fix the two ends of the sole......
Haida Equipment Co., Ltd
|
LIYI Rubber Sole Flexing Shoe Flex Tester SATRA-TM92
|
...Sole Flexing Shoe Flex Tester Product Description This tester is used for testing all kinds of finished shoes after flexing for a certain times in certain angle and frequency, observation shoes and shoe soles damage condition, or check the crack position and degree, to improve quality. Determines the fatigue durability and services life of shoes......
Dongguan Liyi Environmental Technology Co., Ltd.
|
60r/Min 10mm Footwear Testing Equipment ASTM D1052 Ross Flexing Tester
|
...Ross Flexing Tester Footwear Testing Equipment ASTM-D1052 Ross Flexing Tester Instrument introduction Install the shoe sole strip test piece or the whole shoe sole on the ROSS tortuous testing machine, make the incision fall directly above the center of the shaft of the ROSS tortuous testing machine, and drive the test piece or the whole shoe sole on the shaft for 90 degrees of freedom through the ROSS......
SKYLINE INSTRUMENTS CO.,LTD
|
Resistivity Tester Safety Shoe Dielectric Test Equipment 20 kv CE Approval
|
Resistivity Tester Safety Shoe Dielectric Resistance Tester GW-022B • Brief introduction: This tester is used to determine the isolation character of the shoe material. By slowly increase the voltage on the sole to the specified value, check if it can withstand that value in the prescribe time period. • Technical Specifications: Model GW 022B Resistivity Tester Safety Shoe Dielectric Resistance Tester......
Dongguan Guo Feng Testing Machine Co., Ltd.
|
150mm Rubber Iso 4649 Abrasion Test Rubber Shoe Soles Friction
|
...Tester DIN Abrasion Testing Machine Summary: Din Abrasion Tester is suitable to determine the wear resistance of elastic material, rubber, tires, conveyor belts, shoe soles, soft synthetic leather and other materials. Equipment summary: The main function of CE DIN Rubber Abrasion Resistance......
BOTO GROUP LTD
|
