350-6000MHz 100W N Type Male Connector Dummy Load RF Termination Loads RF Terminal Load 3GHz
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) 350-6000 VSWR......
Anhui Bonfire Technology Co., Ltd
|
0.5watt RF Coaxial Connector SMP Dummy Load Terminator 40GHz 50Ohm
|
...SMP Dummy Load Terminator 40GHz 50Ohm Optional Factory Supply Xi'an Elite Electronc ‘s SMP Male RF Load – Termination is a Push On designed that offers 50Ohm impedance and is rated for a maximum frequency of 40GHz. The low-power matched RF load designed and produced by Xi'an Elite Electronics has an impedance of 50Ω, including SMA, SSMA, SMP......
Xi'an Elite Electronic Industry Co., Ltd.
|
DC-3.8GHz 30W N Female Connector GSM Dummy Load RF Dummy Load Termination Load
|
DC-3.8GHz 30W N Female Connector GSM Dummy Load RF Dummy Load Termination Load Product Description Operating Frequency( GHz ) 0-3.8 Impedance( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×34dBm) -110 / -120 Application Indoor & Outdoor Degree of Protection IP65 ......
SHENZHEN ZD TECH CO., LTD
|
30 Watts 3.8GHz N Male High Power Electronic Dummy Load For RF system
|
...Dummy Load RF Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load...
HeFei Vinncom Science And Technology Co.,LTD
|
DC-6GHz 100W 4.3-10 Female Dummy Load / Termination Load
|
... the frequency is wide.And our company also has RF Dummy Load for other types of connectors. RF Dummy Load provides a stable and reliable load for testing and troubleshooting radio frequency equipment. RF Dummy Load can simulate a varying input signal and...
HeFei Vinncom Electronic Technology Co.,Ltd.
|
10W Dummy Load High Power RF Load PIM 155dBc DIN Connector IP65 Outdoor Application
|
... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc....
Lenolink Telecommunication Co.,Ltd
|
200w 50 Ohm RF Resistor High Frequency Resistance Dummy Load Resistor
|
...RF Resistor High Frequency Resistance Dummy Load Resistor product name: Electronic component passive component RF resistor 50 ohm 100 ohm 1000W flange installation terminal resistor ceramic power resistor product description: Description: RIG high power resistance is also called RIG RF resistor, RF RF resistor, high frequency RF resistor, flange RF resistor, load RF resistor, RF......
Sichuan Qixing Electronics Co., Ltd.
|
N male Connector Termination dummy load N-50JR-18A
|
RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF Termination Load......
Terui International Group Co.,Ltd.
|
VSWR 1.25 21×33.5mm Coaxial Terminations 5W Dummy Load DC 12.4GHz
|
...Terminations Series 50Ω 5w Connector N DC-12.4 Max VSWR1.25 21×33.5mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport microwave devices such as circulators and directional couplers to make these ports which are not involved in the measurement be terminated......
Shenzhen Yulongtong Electron Co., Ltd.
|
DC 6GHz N Type BNC Dummy Load Aluminum 100 Watt Dummy Load
|
100W DC-6GHz N type Coaxial Termination DC-3GHz, 6GHz,12GHz,18GHz are available with N connector, SMA are available up to 40GHz. Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.......
Chengdu Zysen Technology Co., Ltd.
|
Submit your “smp dummy load rf terminator” inquiry in a minute :