Stationary Heavy Wall Plunger Sucker Rod Pump / API 11AX Downhole Pumps
|
...sucker rod pump For this type of pump, the barrel is put in the well to the designed depth with tubing. And then put the plunger into the barrel with sucker rod. Given the tubing size, the bore of the tubing pump is larger than that of the rod pump, so the pump rate is higher. According to seating mode, the rod pump can be divided into three types: THC pump (Stationary Heavy Wall, Cup Seating, Tubing pump), THM pump......
Puyang Zhongshi Group Co., Ltd.
|
Plunger Type Carbon Steel Subsurface Sucker Rod Pump
|
...Sucker Rod Pump Plunger Type Product Descrption The plunger surface of the rod pump is spray-welded nickel-based alloy, the inner bore of the pump barrel is nickel-plated phosphorus or carbonitriding, valve ball, Balls and other key parts are made of special corrosion-resistant materials, and are subjected to strict heat treatment and precision mechanical processing. The subsurface sucker rod pump......
Xi'an TianRui Petroleum Machinery Equipment Co., Ltd.
|
Spray Welding Oil Production Sucker Rod Pump With Hollow Cylinder
|
...assemblied on the surface then it is pulled down to the well bottom through the tubing. Thus it is convenient for the inspection and workover because they can be pulled up and down through the tubing and suitable for deeper well. Rod pump: Rod pump is also...
Dongying Oilman Machinery Equipment Co.,Ltd.
|
Polished Sucker Rod BOP Oil And Gas Drilling Operation Application High Rigidity
|
... while stuffing box replacing, and for other repair work. Polished sucker-rod pump Blowout preventor is designed for sealing of sucker-rod pump polished rod, wellhead sealing while stuffing box replacing, and for other repair work. Especially for well...
XI‘AN ZZTOP OIL TOOLS CO.，LTD
|
Alloy Steel Sucker Rod BOP Polish Rod BOP For Oil& Gas Well Control 3000 PSI
|
...Sucker Rod BOP Polish Rod BOP For Oil& Gas Well Control Sucker-rod pump Blowout preventor is designed for sealing of sucker-rod pump polished rod, wellhead sealing while stuffing box replacing, and for other repair work. The Sucker Rod Blowout Preventer is used to prevent oil and gas from leaking, and ensure washing wells and etc Especially for well flooding or other natural disasters, sucker rod......
XI 'AN ZZ TOP OIL TOOLS CO.,LTD
|
CNPC BOMCO pumping unit sucker rod sealing BOP
|
Stock 60 sets in warehouse Pressure bellowing 12MPA Weight 20KGS Size Length 330mm P.N FPM-3 Rod DIA 25mm 36mm 32mm 40mm 42mm We Make F800 1000 1300 1600 1600HL 2200HL mud pump and spare parts A. Fluid end : hydraulic cylinder valve seat cylinder cover ......
Baoji We-Tell-Land Petroleum Machinery Co.Ltd
|
CNPC BOMCO pumping unit sucker rod sealing BOP,AH36001-05.01A. 00 Module, fluid end assembly
|
Stock 60 sets in warehouse Pressure bellowing 12MPA Weight 20KGS Size Length 330mm P.N FPM-3 Rod DIA 25mm 36mm 32mm 40mm 42mm We Make F800 1000 1300 1600 1600HL 2200HL mud pump and spare parts A. Fluid end : hydraulic cylinder valve seat cylinder cover ......
Baoji We-Tell-Land Petroleum Machinery Co.Ltd
|
API 7-1 Fishing Tool Releasing Overshots for Sucker Rod
|
LAKE LT Overshot is one of the fishing tools which is fishing the pipes externally. It can catch drill collar, drill pipe, tubing, subs and other pipes. Because of the seals,the fluid can circulate with the high pump pressure after catching the fish. The......
Dongying On-tech Equipment Co., Ltd
|
Halliburton HT400 Plunger Pump Seals SPM TWS600 / TWS2250/ Gardner Denver 2250
|
...plunger pump seals, SPM TWS600 plunger pump, TWS2250 Plunger pump, Gardner Denver 2250 plunger pump Push Rod Subassembly L-2 Spacer Loc Part No. Retainer,Push Rod HT-400TM, Two Piece Nose, L-Spacer 1 316.21066. O-Ring, 90 Duro, 1 7/8 × 1 5/8 × 1/8, 568-223 2 8.34020. Tie Rod, Push Rod, L-Spacer, HT-400TM 3 316.25166. Push Rod, Two Piece, L-Spacer, HT-400TM 4 316.21065. Retainer, Push Rod Seal......
XIAN ATO INTERNATIONAL CO.,LTD
|
Halliburton HT400 plunger pump seals, SPM TWS600 plunger pump, TWS2250 Plunger pump, Gardner Denver 2250 plunger pump
|
Push Rod Subassembly L-2 Spacer Loc Part No. Retainer,Push Rod HT-400TM, Two Piece Nose, L-Spacer 1 316.21066. O-Ring, 90 Duro, 1 7/8 × 1 5/8 × 1/8, 568-223 2 8.34020. Tie Rod, Push Rod, L-Spacer, HT-400TM 3 316.25166. Push Rod, Two Piece, L-Spacer, HT-......
Qingdao National Premium Oilwell Machinery Co.,Ltd
|
Submit your “soft seal plunger sucker rod pump” inquiry in a minute :