Thermal Insulation PU Coated Fiberglass Fabric 460 g/sqm 0.41 mm with 1800°C Temperature Resistance for Industrial Covers
|
Suntex provides specially formulated polyurethane polymer coated fiberglass fabrics which can withstand temperature up to 1800C for short bursts. It has very good abrasion resistance and good resistance to oils and solvents. Suntex provides one-sided/......
Suntex Composite Industrial Co.,Ltd.
|
Thermal Insulation Rock Wool Thermal Load Test Device
|
Thermal Insulation Rock Wool Thermal Load Test Device First, the scope of use The thermal insulation rock wool thermal load test device is a test device developed according to the technical conditions stipulated in the National Standard GB/T11835-2007 &......
Shanghai Glomro Industrial Co., Ltd.
|
Thermal Insulation Rock Wool Thermal Load Test Device for Rock Wool, Slag Wool and Glass Wool and Products
|
Thermal Insulation Rock Wool Thermal Load Test Device Application Suitable for rock wool, slag wool and glass wool and products. Under a fixed load, the sample is heated at a certain heating rate to achieve a specified thickness shrinkage rate, and the thermal load shrinkage temperature is determined by interpolation by calculation. Compliance with standards Meet the GB/T11835 standard. Technical Parameters The thermal load test device......
SKYLINE INSTRUMENTS CO.,LTD
|
Cable Insulation Sheath Material Thermal Extension Test Device 3 Stations IEC 60245-1
|
...Insulation Sheath Material Thermal Extension Test Device 3 Stations Product Introduction: This test device conforming to the standard of IEC 60245-1. The thermal extension device is refined with special high temperature resistant materials; it is used to detect the thermal extension performance of rubber, plastic or similar materials in the high temperature aging test......
Sinuo Testing Equipment Co. , Limited
|
GB/T11835-2016 Rock Or Slag Wool Fire Testing Device For Thermal Insulation Testing Machine
|
... wool and its products. Under a fixed load, the sample is heated at a certain temperature increase rate to reach a predetermined thickness shrinkage rate. The thermal load shrinkage temperature is obtained by interpolation by calculation. Features:...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Industrial Footwear Testing Equipment For Thermal Insulation Testing
|
...leisure shoes... Type Electric drive; DC motor Weight 40kg Volume 105×45×55cm Corresponding test standard ISO 8782-1 , ISO 20344,GB/T 20991 2. Description: Shoes Thermal Insulation Tester is used to determine the heat insulation performance for the whole...
Dongguan Gaoxin Testing Equipment Co., Ltd.,
|
Rfp Thermal Radiation Testing Device for Floor Construction Products According to En ISO 9239-1
|
...Thermal Radiation Testing Device for Floor Construction Products According To EN ISO 9239-1 Introduction: RFP Thermal Radiation Testing Device is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The test measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal......
Delta Technology (Chongqing) Co., Ltd.
|
ISO 20877 Shoe Thermal Insulation Testing Machine Shoe Cold Resistance Tester
|
... upper during a certain period of time in a specific environment, it can determine the quality of the cold resistance of the shoes. It is applicable for cold resistance performance tests of all types of shoes or...
DONGGUAN LONROY EQUIPMENT CO LTD
|
Resistance To Cracking Winding ( Thermal Shock ) Test Device For PVC Wire And Cable
|
... tool for the wire and cable cracking test, but also applicable to other unemployed soft wire winding test. Standards: • GB/T 2951-2008 Technical parameters: • Max winding diameter: Φ12.5mm • Max winding width: 72mm • ......
Advanced Instruments Co.,Limited
|
IEC60884-1 Electrical And Thermal Stresses Test Device For Screwless Terminals Stepless Adjust Load Current 192 Cycles
|
...Thermal Stresses Test Device For Screwless Terminals Stepless Adjust Load Current Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 12.3.11. Compliance is checked by the following tests a) and b), which are carried out on five screwless terminals of socket-outlets which have not been used for any other test. Both tests......
Guangzhou HongCe Equipment Co., Ltd.
|
