Hand-Operated 0.14J to 1J Universal Spring Hammer Test Apparatus IEC62262
|
... (0.7J) and IK06 (1J) tests. It can meet the test requirements of IEC62262 and IEC60068-2-75. The spring hammer consists of the body, the striking element and the release system. The striking element for severities not exceeding 1J is made of polymide, and...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60068-2-75 Impact Testing Machine Spring Hammer Test Apparatus 0.2J Energy
|
... apparatus. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC 62368-1 and etc. When is an impact test appropriate? An impact test is appropriate for equipment likely to be used in areas with non-restricted access and where...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60068-2-75 Single or Multiple Energy Stainless Steel Spring Hammer Test Apparatus
|
....5 IEC60068-2-75:2014 “Environment testing for electric and electronic products Part2: Test methods -Test Eh: Hammer tests IDT” IEC60335-1:2016 “Household and similar electrical appliances -Safety-Part1: General requirements” clause 21.1 IEC60598-1...
Sinuo Testing Equipment Co. , Limited
|
Universal Spring Hammer,IEC60068-2-75
|
...strictly designed according to IEC60068-2-75 standard. (2)After applying the impact with the hammer, the products is examined with accessibility probes to determine access to chock,energy,and injury hazards. Built in exact accordance to IEC/EN/......
HK LEE HING INDUSTRY CO., LIMITED
|
IK06 spring impact test hammer,1J spring hammer test,single hammer
|
...spring impact test hammer,1J spring hammer test AT SIT10 0.14/0.2/0.35/0.5/0.7/1.0J select one energy AT SIT12 2J spring hammer AT SIT50 0.14/0.2/0.35/0.5/0.7/1.0J contain all The Adjustable spring hammer,universal spring impact hammer from Allied Testing is designed and manufactured to perform the test specified in many standards to determine compliance with requirements concerning Mechanical Strength. Adjustable spring hammer,universal...
ALLIED TESTING (HK) CO.,LTD.
|
IEC60068-2-75 Spring Hammer Calibration Apparatus For Laboratory
|
... hammer. It is the special equipment for the laboratory. Because it is difficult to measure directly for the offered energy of the calibrated spring hammer, the calibration principle of this device is by comparing the energy which is calculated by the...
Guangzhou HongCe Equipment Co., Ltd.
|
Rebound Hammer Test Apparatus Al Alloy Or Plastic Shell Easy Operation Type In One
|
TMH-20 Motar test hammer with Al alloy or plastic shell and Easy operation, type-in-one Motar test hammer 1. Al alloy or plastic shell 2. Easy operation, type-in-one 3. test hardness and strength 4. N W: 0.8kg Brief introduction: This instrument is ......
TMTeck Instrument Co., Ltd
|
IEC60068-2-63 Impact Testing Apparatus , 1J Impact Hammer Test Equipment
|
... ＜10N The whole weight 1450g±10g This spring impact test conforms to the standard requirements of IEC60068-2-63, IEC60068-2-75, IEC60335 and IEC60598. As required in the standards, it is used to test the mechanical integrity of product enclosures. After...
Guangzhou Shice Equipment Co., Ltd.
|
Factory Sell! Ball pressure test apparatus of BS1363 figure 24
|
.... Our main line covers Accessibility Probes, Test Chamber, Weight Sensor, Load Cell, Electrical Ruler, Glow Wire Tester, Spring Impact Hammer, Electrical Safety Tester Series, Environment Tester, Universal Testing Machine, Socket-outlet Gauges Series and...
HongKong Bonad Technology Limited
|
Stainless Steel Electronic Testing Equipment Multi-segment Spring Hammer Impactor
|
...Spring Hammer Impactor Product overview The spring impactor is designed and manufactured according to the GB/T2423 (IEC60068-2-75) standard, and is used for testing the impact resistance of electrical and electronic products, and is the test apparatus necessary for testing......
SKYLINE INSTRUMENTS CO.,LTD
|