80mm Length Unjointed Figure 7 IEC 61032 Test Probe 11
|
...Test Finger Probe Figure 7 Test Probe 11 Unjointed Test Finger Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 7 test probe 11. IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ Application: Other access probes to verify protection of persons against access to hazardous live parts or hazardous mechanical parts This probe......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 61032 Test Probe 11 With Dynamometer 75N
|
Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC 60884-1:2013, IEC 60669-1: 2017, IEC 60335-1:2020, etc. Application:It is used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or internal barriers. Test......
Sinuo Testing Equipment Co. , Limited
|
IEC 61032 test probe 41,test probe, safety test cone probe,test probe
|
... probe 41 Model TP41: IEC 61032 test probe 41 For testing accessibility in appliances with visibly glowing heating elements. Also for testing parts supporting such elements. Complies with IEC, EN, UL & CSA requirements. Made entirely of stainless steel....
ALLIED TESTING (HK) CO.,LTD.
|
IEC 61032 Test Probe C & D, IP3X and IP4X, 2.5 mm Test Rod & 1.0 mm Test Wire
|
IEC 61032 Test Probe C & D, IP3X and IP4X, 2.5 mm Test Rod & 1.0 mm Test Wire Basic Introduction: 1. According to: GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP3X Test Probe C&D ( Test Probe C&D) is the necessary tool to proceed protecting electric shock test......
HK LEE HING INDUSTRY CO., LIMITED
|
IEC60335 / IEC60950 / IEC 61032 Test Probe B For Anti - Electric Shock Test
|
... figure 8.4. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe consists of dito,finger,base and insulated handle which...
Guangzhou HongCe Equipment Co., Ltd.
|
Nylon Material Iec 61032 Test Probe Against Access To Hazardous Mechanical Parts
|
IEC61032 Test Probe 31 Test Cone Made by Nylon Third - Lab Calibration Certificate Available Introduction: It is designed according to IEC61032 figure 14, this probe is intended to verify the protection against access to hazardous mechanical parts of the ......
Pego Electronics (Yi Chun) Company Limited
|
Iec 61032 Test Ul Finger Probe 11 For Unjointed Test Finger
|
Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing......
SKYLINE INSTRUMENTS CO.,LTD
|
IEC60335 / IEC60950 / IEC 61032 Test Probe B Jointed Test Finger Metal Material
|
material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 both joints shall permit movement in ......
KingPo Technology Development Limited
|
Figure 17 IEC 61032 Test Finger B Bar 43 For Verifying Protection
|
Figure 17 IEC 61032 Test Finger B Bar 43 For Verifying Protection IEC61032 Figure 17 Test Bar 43 For Verifying Protection Of Visibly Glowing Radiant Heater Product information: This test bar 43 confirms to the IEC61032 figure 17 and IEC60335 standard ......
Dongguan Kingpo Technology Limited
|
Electric Safety Fig7 Test Finger Probe , Test Probe 11 Of IEC 61032
|
IEC61032 Fig7 Device 11 Rigid Finger Probe Test Finger Probe Main specification and corresponding technical parameters: Parameters /Model SC-F711-F1 SC-F711-F2 SC-F711-F3 Name Test finger Test finger with 50N force Test finger with 75N force 1 20 0 -0.05 ......
Guangzhou Shice Equipment Co., Ltd.
|
Submit your “unjointed iec 61032 test probe 11” inquiry in a minute :