High Frequence Welding Finned Tube Heat Exchanger High Efficient Heat Transfer
|
...Welding Finned Tube Heat Exchanger High Efficient Heat Transfer Product Description The finned tube is a heat exchanger.Is to improve the heat exchange efficiency, usually in the heat exchange pipe surface by adding fins, increase the heat exchange pipe surface area (or internal surface area), so as to improve the heat exchange efficiency, such a heat exchange pipe. Manufacture High frequency and high frequency welding......
Zhangjiagang HuaDong Boiler Co., Ltd.
|
SS304 Fin Type Heat Exchanger , Finned Pipe Heat Exchanger Online Support
|
...Fin Type Heat Exchanger , Finned Pipe Heat Exchanger Online Support Specification Tube Size Fin (OD) Fin Height Fin Thickness Fins Distance Φ18x2 mm Φ38 mm 10 mm 0.3 mm 4-5 mm Φ21x2 mm Φ45 mm 12 mm 0.3 mm 5-8 mm Φ21x2 mm Φ51 mm 15 mm 0.3 mm 5-8 mm Φ25x2 mm Φ50 mm 12.5 mm 0.3 mm 5-8 mm Φ25x2 mm Φ55 mm 15 mm 0.3 mm 5-8 mm Other finned tube size can be customized. (Materials S/S 201, S/S 304, S/S 316 are optional) 1, Materials of the heat...
Changzhou Aidear Refrigeration Technology Co., Ltd.
|
ASTM A213 304 316 Fin Tube Connector Fin Tube Air Cooler Finned Pipe Heat Exchanger Finned Stainless Steel Tubing
|
...fluid to a colder fluid through a tube wall. The rate at which such heat transfer can occur depends on three factors: (1) the temperature difference between the two fluids; (2) the heat transfer coefficient between each of the fluids and the tube wall; and...
Torich International Limited
|
ASTM A312 TP304H Stainless Steel HFW Spiral Welding Finned Tube Heat exchanger Tube
|
... of stainless steel/duplex/nickel seamless tubes. Our clients have covered more than 45 countries. Our stainless steel seamless pipes are widely used in mining, energy, petrochemical, chemical, food mills, paper mills, gas and fluid industries and more....
Yuhong Group Co.,Ltd
|
Flat Sheet Copper Finned Pipe Heat Exchanger Commercial 110 - 120 Voltage
|
Flat Sheet Copper Finned Pipe Heat Exchanger Commercial 110 - 120 Voltage Product Description Fin type: corrugated sheet or flat sheet. The copper tube is made of high-purity seamless copper tube, which has long service life and is not ......
Hefei TATATO Refrigeration Science & Technology Co., Ltd.
|
ASTM A333 GR.6 Heat Exchanger Tube welded steel pipe , heat exchanger pipe
|
...Heat Exchanger Tube welded steel pipe , heat exchanger pipe Description: ASTM A333 Seamless and welded steel pipe for Heat Exchanger Tubes To be used for low- Temperature Standard: ASTM A333 OD. Range:6mm – 16”mm Wall thickness: 1mm-36mm Length: Max length 12M Type: Seamless boiler tube Packaging detail: Bundles with plastic paper packaged or wooden box package Technique: cold drawing, cold rolled Applications: heat exchangers......
Changzhou Joyruns Steel Tube CO.,LTD
|
Stainless Steel Welded Fin Tube Heat Exchanger of Cooling and Heating of Liquids and Gases
|
... 2. Higher heat transfer ability comparing to HF welding and Wrapped fin tube 3. 99%-100% fully weld integrity between tube and fin strip 4. Save cost and assembling space due to higher efficiency 5. ISO 9001:2008 quality certified 6. One of the few in the...
Hangzhou Fin Tube Co., Ltd.
|
RoHS Finned Pipe Heat Exchanger Stainless Steel Aluminum Plate
|
... gas examination under 3.0Mpa air pressure to ensure the tightness. 5. Suitable for water, R134A, R22, R404A, R407C refrigerant and so on Specificaiton: Fin Type Copper Tube O.D. (mm)...
Shanghai Shenglin M&E Technology Co., Ltd.
|
Small Refrigeration Furnace AC Condenser Coils Finned Pipe Heat Exchanger
|
Product Description 1. Material: copper, aluminum, galvanized plate. 2. Copper pipe: diameterΦ7, Φ7.94, Φ9.52, inner grooved or smooth tube. 3. Aluminum foil: hydrophilic or bare 4. Fin type: louver fin, flat fin, corrugated fin 5. Pitch of fins: Ø7 1.1~1.......
Hangzhou Sail Refrigeration Equipment Co., Ltd.
|
H Type Finned Tubes Welded Finned Pipes Tubes For Heat Exchanger
|
...Finned Tubes Welded Finned Pipes Tubes For Heat Exchanger Material Introduction H-type finned tubes are high-efficiency heat transfer elements consisting of carbon steel or alloy steel base tubes with H-shaped fins welded on both sides. These tubes are primarily used in industrial heat exchangers, economizers, and air preheaters for power plants, refineries, and boilers. The H-shaped fin design maximizes heat exchange......
TORICH INTERNATIONAL LIMITED
|
Submit your “welded finned pipe heat exchanger” inquiry in a minute :