8 Inch Wireline Torsion Tester For Torsion Experiment Instrument
|
... standards set by the number of turns and wire twist off laps, qualitative judgment test whether wire can continue to use. II.Parameters A wireline torsion tester is designed for the purpose of testing wireline strength. Usually 8”(Length) wirelines is...
Ruixin Energy Equipment
|
Metal Wire / Cable Torsion Strength Testing Machine , Automatic Cable Tester
|
...wire / cableTorsion Strength Testing machine The main purposes: Automatic Wire and Cable Torsion Tester is suitable for the determination of diameter (or feature size) for metal wire 0.1-10.0mm under the plastic deformation ability and display defects of wire surface and interior in one-way or two-way torsion. Main technical parameters: Product Name Automatic Wire and Cable Torsion Strength Tester......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Automatic Wires Cables Torsion Testing Machine Scientific Researching
|
..., Aerospace, Communication electronics, Auto parts, New energy batteries, Hardware and plastics, Connectors, Wires and cables, Scientific research and testing, third-party laboratories, etc. Tester picture Technical Specification 1. Torque: 0.3~10N.m 2....
Shenzhen Mingyu Instrument And Equipment Co., Ltd.
|
High Performance Automatic Rotating Shaft Torsion Tester Torque Accuracy 0.3%
|
...torsion attenuation) and life test. It can measure the torsion value of each opening and closing, and send the collected torsion signal to PC through USB3.0 photoelectric isolation communication module, which will automatically record the curve change and...
Infinity Machine International Inc.
|
LCD Display Wire And Cable Bending And Torsion Tester With Max Load 10KG
|
...Wire and cable bending and torsion tester is according to pre-set test conditions (bending angle, bending rate, number of trials), with a continuously make test sample right and left bend durability test device and straight line torsion durability test equipment through an external mechanical device. Wherein the fixture terminals of torsion......
Advanced Instruments Co.,Limited
|
Enameled Wire Breakdown Voltage Tester With IEC60851 Standard
|
...Wire Breakdown Voltage Tester (Hot State Voltage Tester) IEC60851 Standards compliant: Compliant with GB/T4074.5, IEC60851 "Test method for winding wire - Part 5: Electrical properties (breakdown voltage)", GB/T4279.11 "Verification method for enameled winding wire test equipment - Breakdown voltage tester......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
torsion testers
|
... as National and global standards “metal at room temperature torsion test method”. It is widely used in the field of quality control; metallurgical steel; machinery manufacturing; civil aviation; institutions of higher ......
jinan hardness STING EQUIPMENT CO., LTD
|
Metal Torsion Testing Machine / Torque Tester / Metal Material Torsion Tester
|
... tested samples are installed between adjustable fixtures to adapt to the torsion mechanical performance tests of different tested samples. The testing machine is controlled by a computer and can collect data such as torque, peak value, ......
Shanghai Glomro Industrial Co., Ltd.
|
IEC61215-2-MQT14.2 Power Cord Torsion Tester For Torque Test After Retention Test.
|
...Torsion Tester For Torque Test After Retention Test. Introduction 1.1 Purpose This machine is mainly used for torque test after retention test. The test time is one minute and the torque value can be realized according to the standard configuration of different weights. 1.2 Standard IEC61215-2-MQT14.2 1.3 Technical parameter No Item Spec 1 Working position 1 2 Wire......
KingPo Technology Development Limited
|
PLC Control Spectral Frame Torsion Tester -90 ~ 90 Degrees
|
...Torsion Tester SL-605 Glasses Frame Torsion Tester Product Introduction Technical Requirements of Ophthalmic Optics-Glasses Frame-Basic Requirements and Test Methods The upper part of this instrument is a sample clamp, and the glasses frame is clamped at both ends of the clamp for torsion......
SKYLINE INSTRUMENTS CO.,LTD
|
Submit your “wire winding torsion tester” inquiry in a minute :