Wound Fin Tube ASME SA179 KL Type With Aluminium Strip For Heat Exchanger
|
Wound Fin Tube ASME SA179 KL Type With Aluminium Strip For Heat Exchanger Product Description KL-type wound fin tubes are produced by tightly wrapping an aluminum strip around the base carbon steel tube under controlled tension. During the process, the base of the aluminum strip is simultaneously knurled and wound, ensuring a tight mechanical bond between the fin and the tube. This structure provides good heat transfer efficiency and prevents fin...
YUHONG HOLDING GROUP CO., LTD
|
Wound Fin Tube, ASME SA179 With Aluminum 1060 , L Type Fin Tube, Air Cooler And Condenser Application
|
Wound Fin Tube, ASME SA179 with Aluminum 1060 , L type Fin tube, Air Cooler and Condenser Application What is L type Fin Tube? And what's the advantage of L type fin tube? L-Type Fin Tube refers to a type of Heat Exchanger Tube that has fins attached to its outer surface in an L-shaped pattern. These fins are typically made of aluminum or copper and are used to enhance heat transfer between the fluid inside the tube......
YUHONG HOLDING GROUP CO., LTD
|
Low Fin Tube, ASME SA179 Seamless Base Tube, Cost-Effective for Feedwater Heaters
|
...Fin Tube, ASME SA179 Seamless Base Tube, Cost-Effective for Feedwater Heaters ASTM A179,ASME SA179 cold-drawn seamless steel tube Chemical Composition Material Chemical Composition(%) C Si Mn P S ASTM A179 0.06-0.18 ≤ 0.25 0.27-0.63 ≤0.035 ≤0.035 ASTM A179,ASME SA179 cold-drawn seamless steel tube Mechanical Propertie Grade ASTM A179 Tensile Strength(MPa) ≥325 Yield Strength(MPa) ≥180 Elongation,% ≥35 Hardness, HRB ≤72 ASTM A179,ASME SA179...
Yuhong Group Co.,Ltd
|
Annealed Seamless Heat Exchanger Tubes ASME SA179 L G Finned Aluminum Tubing
|
... etc 2. Fin Material: Aluminum, Copper Alloy, Stainless Steel, Carbon Steel Finned: Extruded fin, Spiral fin, Embeded G fin, Low fin, H fin, L fin etc Items General Materials Core Tube Material Carbon steel, low-alloy steel, stainless steel, brass, copper,...
TORICH INTERNATIONAL LIMITED
|
ASTM A249 TP321 Austenitic Steel Wound Fin Tube For Air Cooler
|
Wound Fin Tube ASTM A249 TP321 For Air Cooler, Heat Exchanger, Condenser Product Specifications Base Tube Material TP321 Base Tube Standard ASTM A249, ASME SA249 Type Wound, L type, LL Type, KL Type Application Air cooler, Cooling Tower, Heat Exchanger, Condenser Fin type L Type Fin Tube, LL Type Fin Tube, KLM Fin Tube Fin......
YUHONG HOLDING GROUP CO., LTD
|
DELLOK YONGHUI "G-Type Strong Wing™ High-Efficiency Aluminum Wound Finned Tube"
|
... designed specifically for heat exchange industry applications. It employs advanced "G"-type embedded technology, perfectly integrating the fins with the base tube to achieve an optimal balance of heat transfer efficiency, mechanical strength,...
Dellok Yonghui Radiating Pipe Manufacturing Co.,Ltd.
|
Stainless Steel Spiral Boiler Heat Exchanger , Boiler Repair Parts Fin Tube ASME Standard
|
...used to increase the effective surface area of heat exchanger tubing. 3.Finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside;as in heat transfer from a liquid to a gas,vapor to...
Zhangjiagang HuaDong Boiler Co., Ltd.
|
Black Mild Carbon Steel Pipe 5m , Cold Drawn Galvanized Steel Tube ASME SA179 / SA179M
|
...Tube ASME SA179 / SA179M Quick Detail: Standard: ASTM A179/A179M, ASME SA179/SA179M Steel grade: A179,St35,St45,St52,E215,E235,E355,10,20, A106,A179,A192,A210,T11,T22,T12 etc Size: Out Diameter : 20-200mm Thickness: 0.1-20mm Length: 3-8m Description: ASTM A179 seamless steel pipe Standard: ASTM A179/A179M, ASME SA179......
Zhangjiagang Hengli Technology Co.,Ltd
|
High Temp Pressure Resistant High Frequency Welded Spiral Fin Tube ASME Standard
|
... corrosion and wear resistance, and great stability. To boost the tube’s heat exchange efficiency, fins are welded onto the surface of the heat exchange tube. This increases the tube’s outer (or inner) surface area—ultimately achieving the goal of...
ZHANGJIAGANG HUA DONG ENERGY TECHNOLOGY CO.,LTD
|
Air Cooler Spiral Fin Tube ASME EA 106 H Fin Tube OD16-140mm
|
Color options for spiral fin tubes What are finned tubes used for? Finned tubes are the main components of heat exchangers. They are a series of tubes where fins have been added on the outside to increase the contact area with the outside fluid, to ......
Jiangsu Sat-Cham Energy Technology Co., Ltd.
|
Submit your “wound fin tube asme sa179” inquiry in a minute :