| Sign In | Join Free | My burrillandco.com |
|
...ohms Insulation Resistance 20 megohms at 200V DC for 10 milliseconds HI-POT Testing High potential (HI-POT) testing: 100V at a distance of 10 millimeters with a 0.5-millimeter aperture and a current of 0.5 m...
... warranty SPECIFICATIONS The 1746-NI8 is a SLC 500 Analog I/O Module. This Analog I/O Module has 8 Inputs and a Backplane Current (5 Volts) of 200 milliamps. It has a Bandwidth of 1-75 Hertz and an Update Ti...
... warranty Specifications: The 1746-NI8 is a SLC 500 Analog I/O Module. This Analog I/O Module has 8 Inputs and a Backplane Current (5 Volts) of 200 milliamps. It has a Bandwidth of 1-75 Hertz and an Update T...
...20 AMP 10 VDC RACK MOUNT one year warranty Specifications: The 1746-NI4 is a SLC 500 Analog I/O Module. This Analog I/O Module has 4 Inputs and a Backplane Current (5 Volts) of 25 milliamps. It has a Bandwid...
... Resistance Maximum 3.0 ohms Insulation Resistance 20 megaohms at 200V DC for 10 milliseconds High Voltage 100V at a distance of 10 millimeters with a 0.5-millimeter aperture and a current of 0.5 milliamps O...
... module which is equipped with 5 baseplates. It contains 4 remote and/or expansion baseplates in addition to the 1 CPU baseplate. It is equipped with an 80C188XL processor. Power: It runs at 20 MHz and requi...
... module which is equipped with 5 baseplates. It contains 4 remote and/or expansion baseplates in addition to the 1 CPU baseplate. It is equipped with an 80C188XL processor. Power: It runs at 20 MHz and requi...
Milliampere process clamp meter The Fluke 771 provides all the basic features you'd expect to see in a milliamp clamp meter. It measures 4-20 mA signals without having to "disconnect the loop," allowing you to ...
... Current-to-Pneumatic (I/P) Converter The PK200 current-to-pneumatic (I/P) converter offers a low-cost method to convert a milliamp input (4-20 or 10-50mA analog signals) to a proportional pneumatic (air pre...
...-A73 Current-to-Pneumatic Converter The PK200 current-to-pneumatic (I/P) converter offers a low-cost method to convert a milliamp input (4-20 or 10-50mA analog signals) to a proportional pneumatic (air press...
... are typically not used. Connector JBR on DS200TBQCG1ABB writes the 4-20 mA input signals and reads the milliamp output signals to and from the TCQA board in the respective cores. Connector JFR on DS200TBQCG...