| Sign In | Join Free | My burrillandco.com |
|
Multifunctional Tester for Plug Cords Product information: This test device is a multifunctional tester for plug cords or power cables. It is used for a comprehensive test of electrical characteristics includin...
... cable, earphone cable etc. Cables flexible testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rot...
...Tester 1500 Meter Below For Cable Testing Product Description The instrument RSZGF Series High Voltage DC Hipot Tester for Cable Testing is an important equipment for DC voltage withstand test and leakage cu...
...Cable Testing Equipment Static Flexibility Tester Clamp Height 1.5m At Least Standard:IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 cl...
... for mechanical strength testing of finished flexible cables. This test is not applicable to cables with more than two concentric layers whose conductor nominal cross-section exceeds 18 cores. Sample scope: ...
... wires and cables Speficiation 1,Power:AC220V 2,Maximum detection voltage:15KV or 25KV 3,Electrode length:600mm Feature 1,The instant sparks will not damage the good insulation of the cable conductors. 2,The...
... 3,Electrode length:600mm 4.Type:Industry-Frequency Type Feature 1,The instant spark won't damage the good insulation of the cable conductor. 2,There is a linkage signal control with the...
... test of a beam cable or optical cable installed vertically in a specific test condition. Meet the standard: Conformity to GB/t31248-2014, EN50399:2001, GA/t716-......
...Cable Vertical Flammability Tester with IEC 60332-3-10 Products: Bunched Cable Vertical Flame Spread Testing Machine is designed accordance with the relevant provisions of UL1685,GB18380.3 standard about wir...
... spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 details the apparatus and the arrangement and calibration o...
...Cable Single Wire Flame Test Chamber VW-1 Flame Tester FT1/FT2 Flame Test Chamber Technical Description: The single wire and cable vertical burning tester is suitable for measuring the vertical burning non-i...
... length, insulation medium, insulation resistance, buried path, and the cause of the fault. (2) Analysis of the nature of the cable fault: use the "low voltage pulse" of the cable fault tester to test the le...
RJ45/RJ11 lan tester network cable tester Features: *Available for RJ45(UTP/STP), USB, RJ11/RJ12 BNC Coaxial. RCA and modular cables *Operate with Auto Scan or step by step(TEST)mode Our Advantages 1. 100% Manu...
... Resistance Tester , Cable Insulation Resistance Testing , Digital Display I. Product Introduction : Insulation resistance tester, also known as megohmmeter, is used for testing insulation resistance. FK-10K...
1. Product Name: Very Low Frequency AC Hipot Tester for 0.1Hz Cable AC Withstand Voltage Tester 2. Equipment Description: The VLF testers (Generator) are suitable for Testing cables, transformers, switchgear, R...
Cable Testing Equipment For Cord Winding Crack Test In Low Temperature Quick Details Alternative name Cord winding crack tester Function Cable flexibility and rolling durability in low temperature Feature Elect...
JIS , CNS Standard Knob Adjustment Digital Cable Testing Equipment High Voltage Tester 1.Quick Details: Alternative name Cable heating deformation tester Function Test damage degree of conductor and various mat...
JIS , CNS Standard Knob Adjustment Digital Cable Testing Equipment High Voltage Tester 1.Quick Details: Alternative name Cable heating deformation tester Function Test damage degree of conductor and various mat...
...Tester Product Introduction: This apparatus conforms to IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.2 and Figure 2 Rubber i...
...Tester For AC220V Cable Testing Equipment Product Introduction with Cable Testing Equipment: Static flexure testing machine HDX1303 Comply with standards: IEC60245-1, IEC60245-2. Purpose: used for mechanical...