| Sign In | Join Free | My burrillandco.com |
|
Zero phase current transformer >1.3V ZCT Big through hole Nanocrystalline Brand WSD Structure Of Winding Toroidal Phase Single Usage Current Model WSD-03-03B Turns Ratio 1:200 Resistance 12 Ω Primary Current 0....
...current transformers can be applied to test,control,display and record the running of the electrical equipment, and to protect the equipment against the damage,in the AC circuit with the rated voltage value ...
.... The power supply is divided into two parts, one is the CT used to obtain electricity, and the other is to convert the electrical energy obtained by the CT into the required DC voltage and current power sup...
Technical data The current transformers are in accordance with GB20840.2 and IEC61869-2 standards Rated insulation level: 12/42/75kV Rated frequency: 50Hz or 60Hz Rated secondary current: 5A or 1A Ambient tempe...
Technical data The current transformers are in accordance with GB20840.2 and IEC61869-2 standards Rated insulation level: 12/42/75 Rated frequency: 50Hz or 60Hz Rated secondary current: 5A or 1A Ambient tempera...
.... The power supply is divided into two parts, one is the CT used to obtain electricity, and the other is to convert the electrical energy obtained by the CT into the required DC voltage and current power sup...
...5A LZZBJ9-20/24 medium voltage current transformer CT Techanical sheet as below: 20_40/5A, VA:15 24KV, 50HZ, CL:0.5, Bornes: (S1_S2:20/5A) (S1_S3:40/5A), Guarantee: 1year 1 Highest voltage for equipment 12 -...
...1year 1 Highest voltage for equipment 12 - 36 kV 2 Rated frequency 50 / 60 Hz 3 Rated primary current 20 - 5000 A 4 Rated secondary current 1 / 5 A 5 Rated transformation ratio e.g.: 100/5 A 6 Rated output 2...
5A Silicon Steel Power Coil Current Transformer for Power Supply The current transformer are designed to acquire residual (zero sequence) current signal .residual (zero sequence) current usually of the mA level...
5A Silicon Steel Power Coil Current Transformer for Power Supply The current transformer are designed to acquire residual (zero sequence) current signal .residual (zero sequence) current usually of the mA level...
GWSCTK691A008retro-fit (Clamp-on) current transformer has been specially designed to facilitate their installation in new or already existing net works.They may be installed without opening any cable or bus-bar...
GWSCTK691A050retro-fit (Clamp-on) current transformer has been specially designed to facilitate their installation in new or already existing net works.They may be installed without opening any cable or bus-bar...
GWSCTK691A085retro-fit (Clamp-on) current transformer has been specially designed to facilitate their installation in new or already existing net works.They may be installed without opening any cable or bus-bar...
(8) note: This is a current transformer, the secondary does not allow the use of open circuit, it can not be connected fuse....
...Current Transformer 40/5A for Power Monitoring The Schneider Electric METSECT5CC004 is a compact, DIN-rail mountable current transformer from the PowerLogic METSECT series. Designed with a rated conversion r...
...: 720V AC ● Test voltage: 3kV AC(1min) ● Rated frequency: 50/60Hz ● Rated short-time thermal current: Ith=40~60In ● Rated dynamic current: Idyn=2.5Ith ● Rated secondary current: X/5A (X/1A upon...
... Core CT 600/5A Widely Used In Network Switchgears This Type Split Core CT widely used in compact fully insulated ring network switchgears such as ABB-Safe Ring/Safe plus...and cable distribution boxes.The t...
...Transformer Testing Equipment High Accuracy CT/PT Standard Current Transformer Product Description The device can test transformer with accuracy level lower than two or two less level than this device. Techn...
...Transformer Testing Equipment High Accuracy CT/PT Standard Current Transformer Product Description The device can test transformer with accuracy level lower than two or two less level than this device. Techn...