| Sign In | Join Free | My burrillandco.com |
|
LM258DR SOP8 Operational Amplifiers Chip IC with Dual Channel, High Gain Amplifier ORDERING GUIDE LM358B, LM2904B,LM358, LM358A,LM2904,LM2904V, LM258, LM258A SOIC (8) 4.90 mm 3.90 mm LM358, LM358A, LM2904,LM2...
High-Performance Professional Power Amplifier 2X600W Class AB with LED Indicators Sound Quick Detail Specifications Load Impedance 4Ω 8Ω Stereo Output 2 X 800W 2×600W Bridge Output Power 25000W 1500W Input Im...
...2.7V to 10V and a low operating current of typically 5μA. The amplifier's bandwidth ranges from 0.25Hz to 1MHz and its high open-loop gain of 1000V/V ensures excellent accuracy. The TLC271CDR is ideal for us...
...-26V Recommended DC24V Output power: 80W*2+100W (subwoofer) Output load: 4-8Ω Frequency response range: 14-100KHZ Signal to noise ratio: 100 decibels Number of channels: 3channels (left + right + subwoofer) ...
.... With its low input/output VSWR of less than 1.8, it offers high linearity and low noise figure of less than 3dB. It supports a wide range of input power of -10dBm to...
.... With its low input/output VSWR of less than 1.8, it offers high linearity and low noise figure of less than 3dB. It supports a wide range of input power of -10dBm to...
...Amplifier TD-LTE COFDM Signal 5100MHz 5900MHz Ultra-Wideband Product Description: The LTE Power Amplifier is designed to provide high efficiency amplification in COFDM signal applications. It is small in siz...
... Type: Audio • Max Output Power: 88mW • Operating Temperature: -40°C ~ 85°C • Configuration: Dual • Input Type: Differential • Output Power: 44mW • Supply Current: 1mA • Slew Rate: 0.1V/µs • Gain Bandwidth P...
... rises to a certain extent, the cooling fan will work. Features: 1, High output power digital amplifier. 2, DC 15-36V power supply, with reverse polarity protection. 3, When heat sink temperature rises to a ...
...channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, byp...
Product Description 8 /stereo: 4 x 1300 w 4 /stereo: 4 x 2150 w 2 /stereo: 4 x 3200 w 8 /bridge: 2 x 4300 w 4 /bridge: 2 x 6000 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Sl...
Product Description 8 /stereo: 4 x 1600 w 4 /stereo: 4 x 2650 w 2 /stereo: 4 x 3950 w 8 /bridge: 2 x 5300 w 4 /bridge: 2 x 7000 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Sl...
Product Description 4 /stereo: 4 x 2000 w 2 /stereo: 4 x 3650 w 4 /bridge: 4 x 4600 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Slew Rate: >50v/s Damping factor: >3200 Power S...
Product Description 8 /stereo: 2 x 3000 w 4 /stereo: 2 x 5000 w 2 /stereo: 2 x 7200 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Slew Rate: >60v/s Damping factor: >4000 Power S...
...3G/LTE/WiFi RF Power Amplifier 25 Watt Support 433MHz ~ 5850MHz Features: The integrated Noise source and RF PA in one house, smaller size and only connect DC28,6A to it Prevent the interference of high rad...
... of high radiated RF power to monitoring-unit and PA-Circuit We can provide appropriate radiator to you, one radiator can be installed 2 50W-Jammer-Module. Main Specification: No. Item ......
.... With high performance Spurious Suppression of ≤-60dBc, Gain Flatness of ≤±0.5dB, Noise Figure of 2.5dB, Gain of 30 To 40dB and Output Power of 10 To 20W, our RF Jammer Module will meet your different needs...
...100W 50dBm RF Power Amplifier for Microwave Communication Description The module is designed for both military and commercial applications. The latest device technologies and design methods are employed to o...
RFint 100W 2000mA Wireless Lan Wifi PA YP3236W Three-Stage Gain Power Amplifier for 300-1000MHz Product Description Parameter Rating Input RF Power with 50R Output Load +15 dBm Supply Voltage -0.5 to +8.0V Bias...