| Sign In | Join Free | My burrillandco.com |
|
...output on the CCPx/P1A pin, while the complementary PWM output signal is output on the P1B pin (see Figure 16-5). This mode can be used for Half-Bridge applications, as shown in Figure 16-5, or for Full-Brid...
...Microcontroller Unit Features: - 8-bit 8051 microcontroller core - 8Kx8 Flash program memory - 384 bytes of RAM - Up to five interrupt sources - 8-channel 10-bit ADC - 16-bit timers/counters - 6 I/O ports - ...
... for low power applications. The device features a low pin count of 28 pins, a maximum clock frequency of 20MHz, and a wide operating temperature range of -40 to 85°C. The device is ideal for applications su...
... Characteristics PIC16(L)F18857/77 microcontrollers feature Analog, Core Independent Peripherals and Communication Peripherals, combined with eXtreme Low-Power (XLP) technology for a wide range of ......
... Tray Microcontrollers And Embedded Processors STM32F446RET6 App Characteristics Max fCPU: 16 MHz Advanced STM32F core with Harvard architecture and 3-stage ......
...Microcontroller Chips STM32G041K6T6 Microcontroller MCU 32-LQFP Single Core Product Description Of STM32G041K6T6 STM32G041K6T6 Two SPIs (32 Mbit/s) with 4- to 16-bit programmable bitframe, one multiplexed w...
...communication, cache to cache and system memory transfers, cache coherence and other capabilities for the processor. Specification Of STM32MP131CAF3 Part Number: STM32MP131CAF3 Wakeup Pins: 6 Tamper Pins: 12...
ATMEGA2560-16AU microcontroller MCU 256kB Flash 4kB EEPROM 86 I/O Pins 8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash Features Features • High Performance, Low Power Atmel® AVR® 8-Bit ...
...PIC18F452 These devices come in 28-pin and 40/44-pin packages. The 28-pin devices do not have a Parallel Slave Port (PSP) implemented and the number of Analog-toDigital (A/D) converter input channels is redu...
...Pin High-Performance, 1-Mbit Flash Microcontrollers with Ethernet The MSSP module in I2C mode fully implements all master and slave functions (including general call support) and provides interrupts on Start...
...Pin Flash-Based 8-Bit IC CMOS Microcontrollers NEW ORIGINAL Low-Power Features: • Standby Current: - 1 nA @ 2.0V, typical • Operating Current: - 8.5 A @ 32 kHz, 2.0V, typical - 100 A @ 1 MHz, 2.0V, typical...
... STM32F303ZCT6 Software hardware is completely compatible STM32F103ZET6 1. High compatibility: compatible with Sxx32F103 pins & highly compatible with software 2.M4 clocked at 200MHz (with FPU/DSP), RAM up t...
... STM32F303ZCT6 Software hardware is completely compatible STM32F103ZET6 1. High compatibility: compatible with Sxx32F103 pins & highly compatible with software 2.M4 clocked at 200MHz (with FPU/DSP), RAM up t...
...based Microcontroller. Up to 64 general-purpose input/output (GPIO) pins. Two GPIO grouped interrupts (GINT) enable an interrupt based on a logical (AND/OR) combination of input states. Specification Of LPC5...
...-E196K1536 AA Microcontroller MCU 196LFBGA High Performance Product Description Of XMC4800-E196K1536 AA XMC4800-E196K1536 AA is 32-Bit Single-Core Microcontrollers Chip, Every power supply pin needs to be c...
...microcontroller from the STM32F3 series. It features a 64-pin LQFP package and an operating voltage range of 2.0 to 3.6 V. It has a maximum operating frequency of 72 MHz, up to 128 KB of Flash memory, up to ...
... and DAC, and a USB 2.0 full speed interface. Features: • 8-bit C8051F411 core • 48kB Flash memory • 2kB RAM • 32 I/O pins • Extended temperature range •...
...-bit Arm Cortex-M3 core • 64 KB flash memory • 8 KB RAM • 32-pin QFN package • Operating voltage range: 1.8V to 3.6V • Up to 48 MHz clock speed • Integrated peripheral modules: USB, ......