| Sign In | Join Free | My burrillandco.com |
|
...Test Machine Front And Back Twin Stroller Testing Instrument Detailed Descriptions: Produce base on EN1888.2003 regulation. Test method: just baby model into stroller and fixed stroller on the bench, set the...
...Test Machine Front And Back Twin Stroller Testing Instrument Detailed Descriptions: Produce base on EN1888.2003 regulation. Test method: just baby model into stroller and fixed stroller on the bench, set the...
... Test Machine With ISTA, ASTM Standard 120 ~ 300 RPM Description and Application Mainly used in repeating impact, unloading or jump test that comply to ISTA , ASTM, TAPPI, ISO MIL-STD, FED-STD, UN, DOT and o...
... petrochemical industry standards "SH/T 0324-92, ASTM D 6184 Lubricating grease steel mesh oil separation determination method (static method)", and is used to determine the oil separation tendency...
...ASTM Standards Mechanical vibration test system has three testing modes: fixed frequency test, Sweep frequency test and multi-stage frequency test. These three tests provide the users the determination for ...
...or Figure V.2 are further tested by means of a straight unjointed version of the respective test probe applied with a force of 30 N. If the unjointed probe enters the openings, test method 1 is repeated, exc...
...Method Lubricating Oil Scuffing Load Capacity Testing Equipment Introduction FZG gear wear test machine is a multi-purpose testing machine.It can be used for the evaluation of the scuffing load capacity of t...
...Method Lubricating Oil Scuffing Load Capacity Testing Equipment Detailed Photos Product Description Introduction FZG gear wear test machine is a multi-purpose testing machine.It can be used for the evaluatio...
...ASTM E45-76 Method A Ra 6.3 μm A.Content of Delivery Item No Quantity(Pcs) Description Heat No Factory Product No Forged shaft 3 Φ590*1225 20170408-210 4775-4777 B.Chemical Analysis Heat No C% Si% Mn% S% Cr ...
...ASTM E45-76 Method A Ra 6.3 μm A.Content of Delivery Item No Quantity(Pcs) Description Heat No Factory Product No Forged shaft 3 Φ590*1225 20170408-210 4775-4777 B.Chemical Analysis Heat No C% Si% Mn% S% Cr ...
...material, and screen 7 particle size section of material at the same time. The standard screen machine is equipped with timing device to ensure the accuracy and repeatability of test results. Features • Siev...
... accuracy of the penetrant. At the same time, the test block has a rough surface in the sandblasting area, which is used to verify the cleaning performance of the penetrant and the accuracy of the cleaning m...
...ch confirms to standards UL486A-486B and UL498 SD5.3 test method B. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requireme...
...loss of light transmission in test chamber, it can measure smoke density of burning and decomposition of building material during test. Features: The test chamber is Teflon coating, to resist the corrosion o...
ASTM Standard Drop Testing Equipment For Carton Test , Reliable And With Low Noise Specifications Model DT150 DT200 Drop Height Range (mm) 300-1500 300-2000 Specimen Max.Weight (kg) 85 85 Specimen Max. Size (mm...
ASTM Standard 500KG Payload Drop Testing Packaging For Laboratory Drop Test Product Description For large packaging with high mass, the vertical drop height during transport will be low and therefore they need ...
Test Object: Household and similar electrical appliances Item/Parameter: Provision for earthing standards for household appliances: GB 4706.1-2005 27/IEC 60335-1: 2020 27 Standard or Method: Household and simil...
Test Object: Household and similar electrical appliances Item/Parameter: Screws and connections standard for household appliances: GB 4706.1-2005 28/IEC 60335-1 Standard or Method: Household and similar electri...
...Standard or Method: Household and similar electrical appliances - safety - Part 1:general requirements GB 4706.1-2005 29 Household and similar electrical appliances - ......