| Sign In | Join Free | My burrillandco.com |
|
...Audio Power Amplifier TPA122 150-mW STEREO AUDIO POWER AMPLIFIER 150 mW Stereo Output PC Power Supply Compatible – Fully Specified for 3.3 V and 5 V Operation – Operation to 2.5 V Pop Reduction Circuitry Int...
... CIRCUIT PROTECTION (OUT TO GND) • THERMAL SHUTDOWN DESCRIPTION The TDA 2050 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB audio amplifier. Thanks to its high...
...Audio Power Amplifier IC Precision Amplifiers Prec Lo Noise Lo Quies Current Op Amp 1 Features Low Noise: 7.5 nV/√Hz at 1 kHz 0.1 Hz to 10 Hz Noise: 0.8 μVPP Quiescent Current: 760 μA (typical) Low Offset Vo...
...Audio Power Amplifier IC Precision Amplifiers Prec Low Noise Low Iq Op Amp 1 Features Low Noise: 7.5 nV/√Hz at 1 kHz 0.1 Hz to 10 Hz Noise: 0.8 μVPP Quiescent Current: 760 μA (typical) Low Offset Voltage: 5 ...
... for precise audio signal transfer. With its 600:600 turns ratio, it is expertly engineered to match the impedance of audio devices with 600 - ohm impedance. This ensures optimal power transfer, minimizing s...
... input System 5: front 3, back 2 with microphone volume limit System 5: front 3, back 2 with microphone volume limit Output effect 1 Group , MONO output returns 1 Group , MONO output returns Bass signal outp...
... input System 5: front 3, back 2 with microphone volume limit System 5: front 3, back 2 with microphone volume limit Output effect 1 Group , MONO output returns 1 Group , MONO output returns Bass signal outp...
... input System 5: front 3, back 2 with microphone volume limit System 5: front 3, back 2 with microphone volume limit Output effect 1 Group , MONO output returns 1 Group , MONO output returns Bass signal outp...
... input System 5: front 3, back 2 with microphone volume limit System 5: front 3, back 2 with microphone volume limit Output effect 1 Group , MONO output returns 1 Group , MONO output returns Bass signal outp...
... input 1CH Mic audio and 1CH line level balanced audio signal, after the optical fiber transmission ,output 2 CH line level balanced audio from the RX, then connected to powered speakers or amplifier drive s...
...Audio Power Amplifier IC Rail-to-Rail Output, 125C, Op Amps 8-SOIC -40 to 125 1 Features Typical 2.7 V Supply Values (Unless Otherwise Noted) Ensured 2.7 V and 5 V Specifications Input Referred Voltage Noise...
...Amplifier IC Chips Product Specifications: • Supply Voltage (VCC): ± 4.75V to ± 13.2V • Output Voltage Swing: ± 4V to ± 13.2V • Slew Rate: 0.4V/µs • Open-Loop Gain: 70dB • Bandwidth: 1MHz • Short-Circuit Out...
...amplifier integrated board PAM8403 digital power amplifier board Stereo class D power amplifier board 5.0BT product model: CA-8469 output voltage: 5V product size: 35mm*20mm*3mm New board CA-8469 combines PA...
... voltage: 5V product size: 35mm*20mm*3mm New board CA-8469 combines PAM8403 (amplifier module) + Bluetooth (CA-6928) Direct 5V power supply, connect Bluetooth, you can output the horn Contact us Wechat: zq13...
...Amplifier 1943 + 5200 High Power Tube Amp Board 1. The board is a single-channel power amplifier board, which requires dual-channel 2. The circuit design uses A970/C2240 high-voltage audio pair tube dual dif...
...Audio Power Amplifier IC Chip with Low Voltage Operation Product Name: LM386MX-1NOPB Semiconductor IC Chip Features: - Operating Voltage: 4.5V to 18V - Output Power: 500mW - Low Noise - Low Distortion - High...
... Negative Charge Pump Intelligent Muting System; Soft Up or Down Ramp and Analog Mute for 120dB Mute SNR Integrated High-Performance Audio PLL With BCK Reference to...
...Audio Power Amplifier IC Precision Amplifiers 36V,MICROPOWER,RRO GEN PURP OP AMP 1 Features Supply Range: 2.7 V to 36 V, ±1.35 V to ±18 V Low Noise: 19 nV/√Hz RFI Filtered Inputs Input Range Includes the Neg...
...Audio Power Amplifier IC Precision Amplifiers 36V Prec 2.8nV/Hz RRO FEATURES Very low voltage noise: 2.8 nV/√Hz Rail-to-rail output swing Low input bias current: 2 nA maximum Very low offset voltage: 75 μV m...