| Sign In | Join Free | My burrillandco.com |
|
... test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, ......
...Holder Axial Force Tester / Lighting and Luminaries Test Equipment Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, t...
...Test Equipment ISO 9360-1 Anaesthetic and respiratory equipment –Heat and moisture exchangers (HMEs) for humidifying respired gases in humans –Part 1: HMEs for use with minimum tidal volumes of 250 ml Measur...
...Automatic Three Phase Meter Test Bench Accuracy : 0.05 , Used for the test of three phase CT/PT meter with a accuracy class below 0.2, Number of meter position : 3-48 Main Functions: Base error test Dial tes...
...Testing Equipment IEC 60598-2-13 Production introduction: This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires...
... (IP Code)>. This equipment is applied in IPX3 ,IPX4 waterproof degrees testing purposes, which are widely adopted by luminaire products, electrical and electronic products certification institutions, testin...
Ice Water Shock Submersion Test Equipment Standard The Ice Water Shock Submersion Test Equipment is designed and produced as the standard of the ISO 16750-4:2010 5.4.3. Test method Connect the DUT to the test e...
...Testing Equipment Needle Flame Test Standard: IEC 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance Application: This ...
...Testing Equipment For Circular Saw Switch And Lower Guard Standard of IEC Testing Equipment: IEC 60745-2-5 Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular sa...
...Testing Equipment from IPX1 To IPX8 Open Type Standard of IP Testing Equipment: IEC60529 degree of protection provided by enclosures (IP Code), clause 14.2.1, 14.2.2, 14.2.3, 14.2.4, 14.2.5, 14.2.6, 14.2.7, ...
...Testing Equipment Adjustable Test Speed Standard of Electrical Appliance Testing Equipment: IEC 60335-1: 2020 Household and similar electrical appliances – Safety – Part 1: General requirements clause 7.14 A...
... testing of PACK battery packs, offering comprehensive functions and convenient operation. It is capable of performing various functions such as vacuuming, helium filling, pressure and concentration detectio...
... to the requirements of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulati...
...Testing Equipment For Circular Saw Switch And Lower Guard Standard of IEC Testing Equipment: IEC 60745-2-5 Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular s...
.... Current load test and temperature rise test for circuit breakers, contactors, current transformers, and other electrical equipment. During normal operation of electrical equipment, the energy generated by ...
...test system suitable for durability project test of hand-held electric power tool below2.5KW; meet standard of GBB3883.1-2008,GB3881.7-2012 Term17,IEC6074-2-6:2003;professional testing equipment for professi...
... test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and duri...
...Test and Close time Test Equipment with Circular Saw at a 90° cut Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is us...
Test finger nail , IEC 60335-1 Figure 7 Test Equipment Test finger nail Product information: The test finger nail complies with the IEC 60335-1figure 7 standard requirements. It is applicable for the non-remova...
... one of the following apparatus: – a twin enclosed carbon-arc (see C.2.3) with continuous exposure for a minimum of 720 h. The test apparatus shall operate with a black-panel temperature of 63 °C ± 3 °C in a...