| Sign In | Join Free | My burrillandco.com |
|
... minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen,...
...Building Ventilate Fan Introduction Corrosion Resistant Industrial Centrifugal Building Ventilate Fan can be used to input gas as well as to output gas. The gas delivered by the 4-14 series industrial centri...
... or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust a...
.... It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human b...
...Build In GPS Antenna Product Accessories 1.1 Power cable 1.2 User Guide 1.3 Microphone (optional) 1.4 SOS button (optional) 1.5 Relay (optional) Red&black cable for power Orange cable for ACC/ignition Yellow...
...Build In GPS Antenna Product Accessories 1.1 Power cable 1.2 User Guide 1.3 Microphone (optional) 1.4 SOS button (optional) 1.5 Relay (optional) Red&black cable for power Orange cable for ACC/ignition Yellow...
... behavior of building material surfaces is applicable to exposed surfaces such as walls and ceilings. The test is conducted with the specimen in the ceiling position with the surface to be evaluated facing d...
.... The portable lighter gas refill valve is designed with travelers in mind, featuring a compact build that easily fits into any travel bag. Despite its small size, this lighter gas injection valve doesn't co...
ISO 11925 Stainless Steel Building Material Combustion Tester Lgnitability Testing Machine 1. Technical specifications The combustion testing machine is designed and manufactured according to the standard GB862...
Building Materials Cone Calorimeter ISO 5660 Introduction: Cone Calorimeter is to inspect test specimen (100mm*10mm) with flux up to 100kW/m2 for the bench scale oxygen depletion of his development. Building Ma...
Building Materials Cone Calorimeter ISO 5660 Introduction: Cone Calorimeter is to inspect test specimen (100mm*10mm) with flux up to 100kW/m2 for the bench scale oxygen depletion of his development. Building Ma...
Building Polyester Ceiling Insulation Batts R1.5 Moisture Absorption Technical Property 1,Our polyester range products has been tested with Australian standard ASNZS.48591 2,Melting point : 250 ºC 3,Maximum ser...
... for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is originated from ISO 5658-2 (Reaction to fire tests–Spread of flame- Part 2 Lateral spread on buil...
...fire tests in the Euroclass system. ISO 9239-1 Building Material Flooring Radiant Panel Tester measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The th...
..., strong penetration of foam firefighting, minimal re-ignition, high firefighting efficiency, foam range, etc., in the fight against high-rise buildings, oil and other fires have a strong practicality. 2. Ma...
... to the standard requirement of UL746A. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in s short time....
...make combustion completely. 5. Cut-off protection avoild gas leaking. 6. Deflation and ignition operate design. 7. Ideal for construction sites,utility/farm buildings,sports, events,barns and factories. 8. W...
... material, the surface properties of composite materials or components, and tubular products by special fixed installation and test; 1.2 description and measurement of the presence of ignition flame in the l...