| Sign In | Join Free | My burrillandco.com |
|
...road, so in the prevention of fires, smoke density of the test material is essential. Smoke Density Test Apparatus for Building Materials conforms to the national standard ISO5659-2 ASTM E662 BS 6401 GB/T 83...
..., high-strength concrete samples and components and other building materials products. With appropriate fixtures and measuring devices, it can meet the split tensile test, bending test and static pressure of...
... the flame spread characteristics of a material surface. It is mainly used to determine the fire resistance of wall cladding and ceiling materials. The test results are presented in the form of flame spread ...
...the determination of the static smoke volume of building materials and their products when they are burned, and also can be used for the determination of the amount of static smoke produced during the combus...
... and its subordinate products, as well as solid materials, are burned. 2. Standards It conforms to GB/T8627 "Test Method for Smoke Density in Combustion or Decomposition of Building Materials" and ASTMD 2843...
Building Material Flammability Test For Plastics Surface Combustion Testing Scope of application: The experiment was conducted to determine the flame propagation rate of building materials (and to measure the c...
...core principle of Kleinbrenner in Germany. It uses standard flames to conduct vertical direct combustion tests on samples to accurately evaluate the combustion characteristics of building materials. The equi...
...testing machine for Building Material Shops SD-40 Description This kind of manual pressure test pump is easy to operate and maintain. The pump body and water outlet parts are all made of copper parts, which ...
...Test Methods for Flammability of Building Materials’ GB/T10801.2-2002"Extruded Polystyrene foam for Heat insulation (XPS)" 适用范围:主要适用于在规定条件下判断建筑材料是否具有可燃性试验方法. Scope of application: It is mainly appl...
...mainly refers to the t1 test method in ENV 1187 and ISO 12468-1. This method specifies 3 test methods under fire conditions. Method A corresponds to t1 in ENV 1187. , Method B and Method C correspond to ISO ...
Building Curtain Wall Anti - Wind Debris Testing Equipment Product Description ASTM E1886-2005 Building Curtain Wall Anti - wind Debris Testing Equipment [Product Overview] This device is a performance testing ...
..., and a classification system based on the rate and extent of the spread of flame. It provides data suitable for comparing the end-use performances of essentially flat materials, composites or...
..., room corner combustion tester control platform to provide independent gas analysis, including heat release rate and other related test required for related instruments, such as paramagnetic oxygen sensor, ...
Building Materials Smoke Density Tester for Assessment of Density of Smoke Product Introduction ASTM D2842 Specifies the apparatus and methods of test for the assessment of density of smoke from the burning or ...
... materials used in engine compartments and separate heating compartments. Standard: ECE R118 Annex 9 Test to determine the capability of materials to repel fuel or lubricant Specification: The test samples s...
... value of building materials is tested. Including the total calorific value and net calorific value of combustion. It conforms to GB/T14402 - 2007 "Determination of combustion calorific value of building mat...
...Building Material Ignitability Test Apparatus-- Single-Flame Source Test Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the bui...
...Building Material Ignitability Test Apparatus-- Single-Flame Source Test Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the bui...