| Sign In | Join Free | My burrillandco.com |
|
...48% Fe2O3/% ≤3 ≤3 ≤3 ≤2.5 Refractoriness ≥1690 °C ≥1730 °C ≥1750 °C ≥1750 °C Bulk density/g/cm3 1.9-2.0 2.0-2.1 2.1-2.18 2.15-2.3 Unit weight (230*114*65mm) ≥3.35KGS ≥3.55KGS 3.65KGS ≥3.75KGS Apparent porosi...
... ladles. Alumina Spinel Bricks Specs BAND Properties FAS-92W FAS-92T SPEC TYPICAL SPEC TYPICAL Apparent Porosity (%) ≤20 17.5 ≤20 17.0 Bulk Density ≥3.05 3.10 ≥3.10 3.17 Cold Crushing Strength...
... resistance, if you put it into a 1000℃ furnace, and then take it out from furnace, it is still OK.It can bear quick temp-up and temp- down. We can also customize according to your requirement. 2. Specificat...
... metal parts. 2.Data sheet Apparent porosity,% 28 Bulk density,g/cm3 2.0 Modulus of rupture, 20℃ ≥5 1250℃×0.5h ≥3 Phase composition,% Mullite 55% Cordierite 30% Max. service ......
... props mainly used for Microcrystalline stone and sanitary ware firing, has a series of advantages compared with common cordierite: 2. Specification Apparent porosity,% 28 Bulk density,g/cm3 2.0 Modulus of r...
...Microcrystalline stone and sanitary ware firing, has a series of advantages compared with common cordierite: 2. Specification Apparent porosity,% 28 Bulk density,g/cm3 2.0 Modulus of rupture, 20℃ ≥5 1250℃×0....
...: High Alumina Fire Brick is a kind of high temperature fire bricks. It is mainly used in rotary kiln, and its apparent porosity is less than 20%, bulk density is greater than 2.2g/cm3, and cold crushing str...
... ladles. Alumina Spinel Bricks Specs BAND Properties FAS-92W FAS-92T SPEC TYPICAL SPEC TYPICAL Apparent Porosity (%) ≤20 17.5 ≤20 17.0 Bulk Density ≥3.05 3.10 ≥3.10 3.17 Cold Crushing Strength...
...temperature resistance. The bulk density CS-60 of 2.4g/cm³ ensures that these bricks are durable and long-lasting, even under extreme conditions. In addition to their impressive strength, these custom bricks...
...,etc.It is normally used in the middle and lower part of the regenerator. Item Anti-Stripping fire clay brick KN Al2O3, ≥% 44 Fe2O3, ≤% 1.6 Bulk Density, ≥g/cm³ 2.3 Apparent Porosity ,≤% 18 Compressive...
... and lower part of the regenerator. Item Fire Clay Bath Bottom Block XC-43 XC-58 Al2O3, ≥% 43 58 Fe2O3, ≤% 1.5 1.2 Bulk Density, ≥g/cm³ 2.2 2.4 Apparent...
... and lower part of the regenerator. Item Fire Clay Bath Bottom Block XC-43 XC-58 Al2O3, ≥% 43 58 Fe2O3, ≤% 1.5 1.2 Bulk Density, ≥g/cm³ 2.2 2.4 Apparent Porosity ,≤% 20 18...
... porosity fire clay brick DN-17 DN-14 DN-11 Al2O3, ≥% 42 45 47 Fe2O3, ≤% 1.8 1.5 1.2 Bulk Density, ≥g/cm³ 2.25 2.34 2.4 Apparent...
... under load,etc.It is normally used in the middle and lower part of the regenerator. Item Three low fire clay brick DDD Al2O3, ≥% 47 Fe2O3, ≤% 1.0 Bulk Density, ≥g/cm³ 2.42 Apparent Porosity ,≤% 11 Compressi...
...,etc.It is normally used in the middle and lower part of the regenerator. Item Anti-Stripping fire clay brick KN Al2O3, ≥% 44 Fe2O3, ≤% 1.6 Bulk Density, ≥g/cm³ 2.3 Apparent Porosity ,≤% 18 Compressive stren...
... castable AZS-31 AZS-20 Al2O3, ≥% 48 60 ZrO2, ≥% 31 20 Fe2O3, ≤% 17 14 SiO2, ≤% 0.3 0.3 Bulk Density, ≥g/cm³ 3.1 3.15 Apparent Porosity ,≤% 18 18...
... castable AZS-31 AZS-20 Al2O3, ≥% 48 60 ZrO2, ≥% 31 20 Fe2O3, ≤% 17 14 SiO2, ≤% 0.3 0.3 Bulk Density, ≥g/cm³ 3.1 3.15 Apparent Porosity ,≤% 18 18 Compressive strength,...
Glazed tile of furnace door Item Al2O3 50 MgO 3.0 Bulk Density, g/cm3 2.10--2.40 Apparent Porosity,% 28 Compressive Strength, MPa 45 Thermal Shock Resistance,1100 water-cooled,Times 50 Contact us:0...
...1--1.5% SiO2 ≤ 25-30% CaO ≤ 0.4% Compressive strengh ≥ 60Mpa Bulk density ≥ 2.4--2.55g/cm 3 Service temperature ≥ 1700℃ Apparent porosity 18% High alumina phosphated bonded refractory ceramic anchor brick Ce...
...4.0 0.2MPa refractoriness under load T0.6 ℃ ≥1650 Bulk density g/cm3 ≥2.9 Cold compressive strength MPa ≥50 Thermal shock resistance (1100℃ water-cooling) times ≥6 Apparent porosity % ≤18 Contact us:Tel/Wh...