| Sign In | Join Free | My burrillandco.com |
|
...Cable Roller Nylon Sheave Cable Pulling Pulley Cable rollers should always be used when pulling cables.Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to pr...
...Pulling Pulley Block Stringing Block For Power Cable Introduction Power and communication cables are often laid in open trenches where the road and ground conditions result in the cable route having a number...
... Cable Pulling Roller Stringing Tools Cable roller spacing is dependent on cable type being laid and the cable pulling tension along the route. Leading cable rollers are used to support the cable over the en...
... are made of high resistance interchangeable nylon sectors. The machine is completely electronically controlled. Performance Puller Max pull: 90kN Speed at max pull: 2.4km/h Max speed: 5km/h Pull at max spee...
...Cable Tensioner Hydraulic Pump German Rexroth/Dnish Danfoss Quick Detail: Max tension: 2x100kN/1x200kN Rated tension: 2x80kN/1x160kN Max reverse pulling force: 2x40kN/1x80kN Pull at max speed: 2x40kN/1x80kN ...
... result in the cable route having a number of curves. With the cable’s own weight and the high tensions involved the cable cannot be fed cleanly. The ground cable rollers and corner cable rollers from SINTA ...
... areas, and of 4-bundle conductor of 720mm2 and below in flat lands; besides, it can be used for traction stringing of OPGW or ADSS optical cable and 500kV traction stringing in various terrains. Model Max i...
... result in the cable route having a number of curves. With the cable’s own weight and the high tensions involved the cable cannot be fed cleanly. The ground cable rollers and corner cable rollers from XINYA ...
... IEC60335-1:25.15. The test equipment is mainly applied for testing the power cord tension and torque at the terminal two trials of the appliances which are with a power cord, and intended flexible cord perm...
...re the road and ground conditions result in the cable route having a number of curves. With the cable’s own weight and the high tensions involved the cable cannot be fed cleanly. The ground cable rollers and...
... in the cable route having a number of curves. With the cable’s own weight and the high tensions involved the cable cannot be fed cleanly. This product can be fixed in the corner of angle steel cross pole to...
...erwise adjust the "tension" of a rope or wire rope (also called "cable" or "wire cable"). In its simplest form it consists of a spool and attached crank. In larger forms, winches stand at the heart of machin...
...Cable Pulley For Stringing Introduction Power and communication cables are often laid in open trenches where the road and ground conditions result in the cable route having a number of curves. With the cable...
...supply,save labor and time. Characteristic It can reduce the tension of traction device in the cable wiring.With reinforced steel bottom structure.With high strength nylon track.With apair of nylon pulleyto ...
Alloy Steel Cable Pulling Clamp 3T Half - Moon Shape Clamping Jaw 3T Steel Wire Rope Grip For 16-32 mm Rope is ideal device for gripping, Pulling and tensioning of messenger wire ropes,cables and metal rods, de...
...Cable Pulling Clamp SKL-40 , HIT TOOL Wire Grip Clamp Application Used to pull conductors in power and communication line construction field, and to maintain temporary tension until it can be permanently te...
... Speed at max tension: 2.5km/h Max speed: 5km/h Tension at max speed: 2X35kN Traction condition Max reverse pulling force: 2×60kN Speed at max pulling force: 2.5km/h Max reverse pulling speed: 5km/h Pulling ...
Engine imported Max intermittent tension 2x70/1x140kN Hydraulic Diesel 77kw(103hp) Model GL1X20 GL1X40 GL1X50 GL2X35 GL2X40 GL2X50 GL2X70 Maximum intermittent tension kN 20 45 50 240/180 245/190 255/1110 ...
...tension machine, this model allows for the tension stringing of 220kV lines in mountainous and hilly areas and can be used for the traction stringing of OPGW or ADSS cable in various terrains. Characteristic...
...Tensioner Equipment 3.5T with imported Engine Structure Parameter Bottom diameter of tension wheel groove 1200mm Trial traverse diameter 34mm Total weight 2200kg Boundary dimension 4000×2000×2300mm Performan...